Easy layers attachment

[Weldabeast]

Slow at work today and I had some paracord laying around.... Tie 2 celtic stopper knot onto a loop of paracord, girth hitch to pack, vest, batttlebelt, etc.. With 2 stoppers on each loop u can attach multiple layers..

 

[Fuse Dude]

Ranger beads are the sh!t.

 

[woodsdog2]

I always thought ranger beads were the distance beads the US Military used per 5/km traveled in land navigation. Learn something new every day.

 

[Weldabeast]

I always thought ranger beads were the distance beads the US Military used per 5/km traveled in land navigation.

Pretty sure u are correct...

 

[woodsdog2]

So the bead is not a bead at all then? Its a knot? That's cool.

 

[raisins]

Slow at work today and I had some paracord laying around.... Tie 2 celtic stopper knot onto a loop of paracord, girth hitch to pack, vest, batttlebelt, etc.. With 2 stoppers on each loop u can attach multiple layers..

View attachment 42217View attachment 42218View attachment 42219View attachment 42220

I might try this with elastic cord to make my own bungee cord ball loop thingies for stick attachment.

 

[Weldabeast]

Yes...it's a knot made.of Paracord that slides up and down a length of Paracord....if u get the "bead tied tight when u slide it and load it the knot grabs pretty good and hold in place. I haven't had anything work loose

 

[Weldabeast]

 

[thedutchtouch]

This could be a decent stick attaching method too, as long as the loop is big enough to pass the standoff/steps through before cinching down. cheaper than the voile straps I have, stay attached so can't get dropped, and no metal buckles. I like.

 

[Weldabeast]

U need to get the knot tight as u can....like 1 end was in the vice and the other end I got pliers so start out with way too much rope so at the end u can really get a good grip

 

[raisins]

U need to get the knot tight as u can....like 1 end was in the vice and the other end I got pliers so start out with way too much rope so at the end u can really get a good grip

Just be careful....was stretching spectra d loop cord in a vise using a screwdriver that had the cord wrapped....got on the edge of the vise too much and cut the cord....I flew backward and hit a wall of tools!

 

[Weldabeast]

Just be careful....was stretching spectra d loop cord in a vise using a screwdriver that had the cord wrapped....got on the edge of the vise too much and cut the cord....I flew backward and hit a wall of tools!

Sounds like u need to work that vice a little harder....I can't remember the last time mine had a flat/sharp edge.......hahahahaha