• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Recent content by wayne r

  1. wayne r

    United blood tracks data on fixed blade vs mechanical

    yes some will come out of the nose but most will fill the diaphram if you have an entry and no exit, depending on entry you might not get much dropping if any an exit lower down will give you good indication and importantly a better indication of shot placement to start follow up.
  2. wayne r

    United blood tracks data on fixed blade vs mechanical

    There is so much more to recovery aside from shot placement and broadheads but having the equipment as good as it can be is important, what is missing from all these stats is what happened after the shot because these are the most important factors to recovery, was the deer followed up...
  3. wayne r

    Small Platform

    Yes i will mill it, I have ordered some offcuts that fit the size in theory i am thinking this will be better than cast, looking forward to the milling,regards wayne.
  4. wayne r

    Chronic Overthinking...Is Trad Archery Simple???

    first thing you should do is pick the bow back up and get shooting again, going back to fun, forget about your friends and just shoot.
  5. wayne r

    Small Platform

    I haven't got into the workshop yet to make this but materials are on the way but here's a small platform I am going to try it will have a boxe section with a top standoff using the base as the bottome one, size is roughly 7-1/2"l x 8-1/2" w at it's widest and 1/2"d
    • wayne r
    • Thread
    • Replies: 2
    • Forum: DIY
  6. wayne r

    Small compact or large and comfy-this is the new dilemma in platforms

    For me I am going small, I have to travel so weight counts for the plane. Here's one to machine to test out, I will get the material in to give it a whirl,regards wayne size wise its roughly 7- 1/2" x 8-1/2" x 1/2" cam over style.
  7. wayne r

    How much have you spent on your saddle setup?

    For me probably 150 all in as I am a big diy'er but now ask me how much I spent on machinery to make my gear, welder, sewing machines 3d printer and so on, so in truth it would have been far cheaper to buy them from a supplier, lol but were's the fun in that.
  8. wayne r

    3D printed steps

    I think all of the designs you have done including the one you tweeked for me are good, like you say safety first but if you have your printer dialed in for good layers then these work, I printed half of one and tried to smash it and I had a real hard time of breaking it, looking forward to...
  9. wayne r

    Frankenstein Saddle ( and related accessories )

    sorry I missed this looking really nice indeed,regards wayne.
  10. wayne r

    3D printed steps

    PM sent to you with my thoughts and additions but these are worth tweeking, there is zero side movement, these are very nice with my printer settings I tried to break a half printed one before making the full step and it wouldn't break. Printing these did take some time but it does it's own...
  11. wayne r

    3D printed steps

    As soon as I do the alterations I will post an update but as is it’s strong printed with Petg, it is also chemical and sun resistant which is why I went with it, also the ozone unit I printed works well so I can add the stl for anyone wanting to try that with a parts list I did a few variations...
  12. wayne r

    3D printed steps

    I posted on FB using the STL off Yeggi, I think its PSomeone's stl, I printed in PETG and tried to break them before trying it out on the tree, I found them really strong, I printed slow with 100% infill. I actually really like them I wouldn't try them in PLA though I have a few ideas to try...
  13. wayne r

    DIY 3d printed two-blade broadhead case

    Petg is strong and is resistant to heat or chemicals you also don’t need an enclosure with petg just print without the parts fan
  14. wayne r

    Sewing Machine advice

    for that kind of money you could get an all singing and dancing juki and have a load of cash left over and both share,regards wayne
  15. wayne r

    The phantasm is born

    Nice have you tried it out yet how’s the fit and comfort, regards Wayne
See more
Back
Top