DIY Climbing sticks, Materials Needed
1 - 1" x 1" x 1/8" wall 16" length
2- 10" pieces of 1x1/4" steel bar stock (Bend in middle 90°) Drill 5/16 hole in the crotch of bend.
2 - 1/2" x 6{" bolts (GRADE 8)
2- 1/2" washers
4 - 1/2 Nuts
3 - 5/16 x 2 Bolts (Grade 8)
5 - over sized Grade 8 washer 5/16
1- 3/8 flange nut
3 - nylock flange nuts
Assemble each step as show, Bolt - Printed grip - Tube (with bolt in middle) - washer bolt, Tighten Jamb wall between both nuts on far side away from grip
Versa Button Type catch, from front to back Bolt - Oversized washer, 3/8 flange nut facing over sized washer - another washer - tube - washer - Nylock nut
Stand offs, Bolt - Washer - tube - washer - Nylock nut
And no if you are thinking I'm crazy and wanna lecture me this is not a strap I'd use at any height this was 1' off the ground just to play with and try before posting, just to lazy to get my proper straps out.