Spreader Bar Ideas for TL

Discussion in 'Scent Control' started by fawnzy, Sep 9, 2017.

  1. fawnzy

    fawnzy Active Member

    Joined:
    Jul 4, 2014
    Messages:
    568
    Likes Received:
    85
    From ideas on another thread......

    I was thinking a closed loop bridge that runs through a plastic tube and the tether loops on the TL. The bar would be between the tether loops.

    It would look like the handle on a waterski rope.


    Sent from my iPhone using Tapatalk
     
  2. ImThere

    ImThere Well-Known Member

    Joined:
    Oct 20, 2015
    Messages:
    789
    Likes Received:
    417
    Location:
    Lewisburg, TN
    So try a pvc pipe with a tee on both end use a prussit on both ends drill a hole in the middle of the pvc and pull the excess rope through with a rubber oring on it to keep the slack out. Or use a bungee in between the prussits


    Sent from my iPhone using Tapatalk
     

Share This Page