• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Tether locker

Never needed one, 80 sits this year in a saddle. If 8 am worried I just run it through the eye twice but rarely if ever do I do that.
 
I really think that the saddlehunter hitch is easier because it only gets slack when you pull on the carabiner. Then tie a JRB hitch before rappelling down. The rope is doubled over already and is in easy position to tie the JRB hitch.
 
bodark said:
I swear to god people on here will find a solution for a problem that doesn’t exist. Spend your money however you see fit.
Click to expand...

If you climb with your tethered attached or unweight it ever, then it can loosen and fall. These things stop that. It is an actual issue for some depending upon how they hunt and climb.
 
This is how I do mine. It works with any rope from 8mm to 11mm and it holds as tightly as you want it too. It doesn’t hurt the rope, and it won’t hurt a quick link either if that’s how your attaching your tether. It won’t wear out nearly as quickly as a rubber washer and it’s extremely easy to make one DIY.
BA687863-3FDD-45A3-9DD2-EB8AD4A09C3A.jpegB200A139-D6F3-4AB3-94CE-B748795E2AD9.jpeg3B705B10-051B-45E7-B24B-599CB2927B34.jpeg
 
I do a castration band but around the eye of the tether. I cinch the eye down tight on the tether part and when I’m done it can be used to keep the rope tidy
 
Fl Canopy Stalker said:
This is how I do mine. It works with any rope from 8mm to 11mm and it holds as tightly as you want it too. It doesn’t hurt the rope, and it won’t hurt a quick link either if that’s how your attaching your tether. It won’t wear out nearly as quickly as a rubber washer and it’s extremely easy to make one DIY.
View attachment 58965View attachment 58966View attachment 58967
Click to expand...

Where is the hook from and what is it made of?


Sent from my iPhone using Tapatalk
 
Hunter260 said:
I do a castration band but around the eye of the tether. I cinch the eye down tight on the tether part and when I’m done it can be used to keep the rope tidy
Click to expand...
I was using an elastic keeper and doing the same thing. It worked pretty good.
 
FrankNess14 said:
Where is the hook from and what is it made of?


Sent from my iPhone using Tapatalk
Click to expand...
That particular hook is from a paracord tie down system. All the ends and sides are machined smooth and somewhat rounded. I tie a heavy duty elastic cord into a 10” loop then make a 4 wrap prusik onto the rope. It’a super light, it doesn’t interfere with anything, cheap (less than $6 to make) and it doesn’t start sliding down after you put weight in it because the elastic cordage pulls it back into shape
 
FrankNess14 said:
Where is the hook from and what is it made of?


Sent from my iPhone using Tapatalk
Click to expand...
The hook is a light metal but honestly a delrin or acetal plastic hook would hold just as well because of the stretch of the cord so it’s only holding a limited amount of weight.
 
Last edited:
You must log in or register to reply here.
Back
Top