• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Wild Edge Measurements.

P

preslar1

Member
Joined
Oct 9, 2019
Messages
61
Looking to get some measurements from someone that owns some WE steps. Plan to make a few at home and would like a good starting point. Thanks.

Sent from my SM-G950U using Tapatalk
 
The rung is 6 1/2 inches. Each side is 12 1/2 inches total length with 4 7/8ths inches to to center of the radius, where the rung is welded across. distance between the top stand offs is 3 5/8ths The stock is 1/2 inch square. you'll have to figure the angle of the bottom welded "V". Good luck. all measurements are approximates. Should get you started.
 
Kurt said:
The rung is 6 1/2 inches. Each side is 12 1/2 inches total length with 4 7/8ths inches to to center of the radius, where the rung is welded across. distance between the top stand offs is 3 5/8ths The stock is 1/2 inch square. you'll have to figure the angle of the bottom welded "V". Good luck. all measurements are approximates. Should get you started.
Click to expand...
Could you post a few pictures of the parts your measuring? For visual reference.

Sent from my SM-G950U using Tapatalk
 
This is only pic I have.
84d6e93ffac735b9a62a3f3c1ffe7d26.jpg


Sent from my SM-J320V using Tapatalk
 
You must log in or register to reply here.
Back
Top