• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

adult arrow quiver?

fr0sty

Active Member
Joined
Sep 14, 2017
Messages
180
Location
Minnesota
I have some grizzlystik samurai overill 175 broadheads any they are too long for my quiver, so the entire broadhead isn't covered. What quivers are you folks with longer broadheads using?
 
I have some grizzlystik samurai overill 175 broadheads any they are too long for my quiver, so the entire broadhead isn't covered. What quivers are you folks with longer broadheads using?
Not going to touch this one!!!!!
 
I just switched to Tight Spot because of how my GrizzlyStik Samurai 200's stuck out. They are fully guarded now
 
I use a 6 arrow Kwikee with some open cell foam glued in place of the factory guts on my recurve and a Tightspot on my compound. Both do a good job on my 2.75" long Grizzlys. It would be pretty easy to add a leather or plastic shroud around the bottom of the Kwikee's hood if you have really long broadheads.
quiver.jpg
 
I cut out the insert of a TightSpot and lined the inside with mole skin. I would imagine doing this to any quiver would get you the clearance you need. 200 grain cutthroats fit nicely in mine on top of GrizzlyStick and Ethics components.
 
A cheap 4 arrow Bohning should do it. Similar to a Kwikee.
 
Tightspot works for me. Best quiver around imo. So many adjustmests. Super quite.

I cut out the insert of a TightSpot and lined the inside with mole skin. I would imagine doing this to any quiver would get you the clearance you need. 200 grain cutthroats fit nicely in mine on top of GrizzlyStick and Ethics components.

Like the mole skin idea. Gunna use that one for sure. Hate getting 'em to a mirror finish
then shoving the tip in the foam. Even though it just enough to hold 'em.

Great idea.
 
Back
Top