Once you get one dialed in they really make it easy.Awesome!!! I need to find a 15-91 and get some tutoring from you.
Looks great!
What size needles are you using for the tera 40 and also for the V-92 thread?
Thanks!
After the transformer clone, this one is super easy. Hit me up for measurements or questions.I’ll probably try and make this next. Man you have great diy threads! It’s super nice of you to leave links to all the supplies as well.
If I had to guess, I would estimate it around 86 to 90” with a 4” over lap… I wonder how close I am lol@jhunter13 do you know the total 1.75 suspension webbing length for a size one of these?
Not off hand. I laid a piece out with clips along the entire saddle and then marked it to length accounting for the over lap. I can get you my measurement tomorrow for mine. It will slightly bigger than a size 1.@jhunter13 do you know the total 1.75 suspension webbing length for a size one of these?
I don’t know how close the kestrel and kestrel flex were as far as webbing but my size 2 kestrel has a 1.75” outer webbing that is roughly 88” and has a 6 inch over lap so the final continuous loop is 82”Not off hand. I laid a piece out with clips along the entire saddle and then marked it to length accounting for the over lap. I can get you my measurement tomorrow for mine. It will slightly bigger than a size 1.
My clone size 1.5 ended up with 83.5" length with a 5.5" overlap so a 78" loop.I don’t know how close the kestrel and kestrel flex were as far as webbing but my size 2 kestrel has a 1.75” outer webbing that is roughly 88” and has a 6 inch over lap so the final continuous loop is 82”