• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Genesis 3D Tether Assist

Hobo4000

New Member
Joined
Dec 16, 2020
Messages
16
Hey all, I as wondering if anyone had a Genesis 3D printing tether assist and if you could measure the eye size for me or if anyone knows what it is. I run a 10.2mm tether and wanted to make sure the eye wouldn't be too tight. I poked around here and didn't see much detail on them and I haven't heard back from Genesis yet. Stay safe and happy hunting!
 
Think you may have some issues getting the end thru if you have heat shrink on a 10mm rope but beyond that, shouldn't be an issue.



Sent from my SM-N960U using Tapatalk
 
Think you may have some issues getting the end thru if you have heat shrink on a 10mm rope but beyond that, shouldn't be an issue.



Sent from my SM-N960U using Tapatalk
Thanks! I don't have the end heat shrunk. I'll have to give it a try.

Edit: If I get my hands on one I'll post results.
 
Without removing the rope from the tether assist I was able to get an internal measurement of the hole of 11.6 mm with a set of digital calipers.
 
Without removing the rope from the tether assist I was able to get an internal measurement of the hole of 11.6 mm with a set of digital calipers.
Thanks for measuring! That's exactly what I was hoping for. I seriously appreciate it!
 
Back
Top