Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
The SH Membership has gone live.
Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest.
Current members will need to follow these steps to upgrade:
1. Click on your username
2. Click on Account upgrades
3. Choose SH Member and purchase.
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here:
Vendor Access Area Rules
Is anyone else having problems with these sticks as far as the male part of the suction cup breaking? What is everyone replacing this with to correct the issue that will work?
I haven't had one break; seems to be a more recent phenomenon. However, I put strips of furniture pads on the inside walls of the stand offs and they're just the right thickness to hold the sticks snug and prevents clanking.
All my male parts are broke, including the ones on my helium sticks. But seriously, yes had same issue. The d*** things got stuck in the plunger I could barely pry them apart. I broke two in the field first day out... then two more broke another time. I eventually took off the plungers and male ends and just replace the plungers with some rubber chair leg caps from lowe's to help cushion the sticks when I tie them together. Ie, those helium stick plungers suck a**
*The Stick Mule system requires two of our Standard Versa Hangers, if you want to store them on the back of a combat belt or saddle. If you already have purchased those from us then you should be all se. The Versa Hangers that work with the Hawk, API, or LWCG versa buttons will not work with the...
After reading about all the ways to fix the suction cup issue and breaking two of the male ends on the minis I have I decided to sand and shave my cups last night. I got a couple of the female cups trimmed with a razor last night and grabbed the dremel to sand the male ends when I noticed in my dremel kit I have a grinding wheel that's the exact size I need to basically plunge cut into the female side. I did all my female cups and now my stick fit together perfect and it takes a violent shake them apart. If I have three sticks stacked and hold the top one they will come apart if I shake them but I'll take it since I use a gear tie to hold them together anyways. I can measure the grinding wheel if you like.
I ended up using a pipe deburing tool on the female parts. They work good now. Just waiting on the male parts to come in from Hawk they are send me free of charge