• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Hickory Creek Mini In-Line Vertical Crossbow

e7b43b606cdc49fa43b5654c76c280c5.jpg



Sent from my iPhone using Tapatalk Pro
 
Well. It's not a mini, but I'm super happy with my original I got from @kyler1945 . Just finished tapping it for a scope rail and getting it mounted up. Psyched, and couldn't be happier with the support from Jerry in helping get it tuned and ready. Only other thing I will do after sighting it in is drill and tap it so I can add the trigger guard they now come with.2020-03-25 22.30.42.jpg
 
I put monkey tails on my strings, limb saver split limb dampers on the limbs, and added 100gr to the original arrow weight.

The bow sounds fairly muted now to how I received it, and a much less twangy unnatural sound at that.
 
It’s much quieter than any other crossbow I’ve shot. But it also shoots about 50-100 FPS less too. That’s a big reason.

Another thing to keep in mind is that crossbows are probably not Quite as loud as we make them out to be - your face is literally next to the bow when you shoot, versus 2-3 feet away with a compound. It makes a big difference.

And last, there’s a lot of reason to suspect deer don’t react to the noise of a bow when shot at. It’s likely they’re reacting to hearing that noise, which gets their attention, then seeing/hearing an arrow hurtling at them, and that gets the duck and run instinct to kick in.
 
twangy unnatural sound at that.

Yea this is what keeps bothering me a little bit, but I recorded myself shooting it a few feet away and it doesnt really pick up the sound that well. I may just roll with it. @Nutterbuster when you turned it up to 150# did you move the D-loop?
 
I hear none of the musical vibration of the string like my other xbows (Scorpyd Deathstalker, Scorpyd Velocity 165 and Barnett Recruit Compound). The stock string dampeners must work. I also have the limb bolts backed out for easier cocking
 
So guys idk what is going on but one minute I'm shooting great and the next its F****d up. Any help?? I had it sighted in at 30 yards, shot at 20 and it was on went to 30 and it was just a hair off from the shakes. I tried again at 30 and its shooting about 1' to 1' 6" low. I even turned my sight to go up and it wont turn anymore. Nothing is loose, or bent. Idk what is going on. Btw I'm aiming at the "O" in blackout.

Screenshot_20200603-174359_Gallery.jpg
 
Nvm just glanced over it again and figured it out had some loose bolts.... I'm starting to realize that after I shoot it a bit I'm gonna have to tighten up all the bolts. The handle was loose the other day after shooting it.
Screenshot_20200603-175425_Gallery.jpg

Screenshot_20200603-175419_Gallery.jpg
 
Nvm just glanced over it again and figured it out had some loose bolts.... I'm starting to realize that after I shoot it a bit I'm gonna have to tighten up all the bolts. The handle was loose the other day after shooting it.
View attachment 28780

View attachment 28782
Same thing has happened to me. I gave up on it for a bit, but I need to get back to fixing, zeroing, and practicing. If anyone has a solution to the bolts loosening from shooting I'm all ears. It concerns me that I think it is shooting fine but could go out in the woods and not realize it has shifted. It's my first crossbow. Maybe this is normal given all the pent up power being released.
 
Same thing has happened to me. I gave up on it for a bit, but I need to get back to fixing, zeroing, and practicing. If anyone has a solution to the bolts loosening from shooting I'm all ears. It concerns me that I think it is shooting fine but could go out in the woods and not realize it has shifted. It's my first crossbow. Maybe this is normal given all the pent up power being released.

Also my first crossbow, I think its gonna be an awesome deer killer. I love how simple it is once in the tree. I just have to keep an eye out on the pieces and bolts, make sure before and after I shoot it that everything is tightened down and in place.
 
Blue lock tight should work on the bolts that are loosening. Are the whisker biscuit screws tight? Scope mount screws?
 
For mine the scope mount screws are most vulnerable to loosening, followed by the front hand grip screws.
 
With mine (now currently Nutter’s) we got best accuracy by using a normal nut up front snugged up with a socket. Of course that also eliminated the ability to easily break it down.

It wasn’t all over the place though when using the hand nut, it just didn’t group as tight over 50yds.


Sent from my iPhone using Tapatalk
 
Back
Top