• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Mobile Bow Maintenance Center

ShooterMike

Well-Known Member
Joined
Aug 25, 2020
Messages
951
Location
Caroline County, Virginia
Partly DIY. I cut and welded together the stand. Having a small space to work out of necessitates the need to consolidate work spaces.

Mounted the Revolution Arrow Saw on the back side of the stand, which holds the press/draw board, and vise. Made a rack to set on top of the press to sit the target on. In all reality, I think I was looking more for a reason to weld something.
75c8e6d2a97810a29c0d1de5d74dac3e.jpg


ee0f7b701386426f476f5d2708c5dc3e.jpg

786586426d1f053d0f4a06963f6fda85.jpg

f2cd7ab5464cfd99a7b959d3b27e3505.jpg



Semper Fi,
Mike
Sent from my iPhone using Tapatalk
 
Awesome! One tip I'll give ya after making something almost identical except mine has a draw board on it....replace those caster with locking ones! It'll keep that stand from walking away from you while pressing.
 
Awesome! One tip I'll give ya after making something almost identical except mine has a draw board on it....replace those caster with locking ones! It'll keep that stand from walking away from you while pressing.

Thanks man. Yeah, this has a draw board on it too. The casters were what I had left over in one of my scrap bins. I need to find a small vacuum and light to attach to it as well.


Semper Fi,
Mike
Sent from my iPhone using Tapatalk
 
I was reluctant to buy the Revolution Arrow Saw, but it is well put together. Gets my mind spinning thinking of what I might want to make out of 8020. I’m thinking I want to make a fold away spring-loaded work table to mount the Van Master Pro beneath the saw. Make it so I can pull it out and up when I want to fletch arrows.


Semper Fi,
Mike
Sent from my iPhone using Tapatalk
 
Got pretty excited because I thought this was in the classifieds. I thought "Oh for sure this is mine now! I'm just down the road from you bro!"
 
Back
Top