• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

PLEASE CLOSE-New Spliced Tethers and Linesman’s, and Gear- PLEASE CLOSE

Status
Not open for further replies.
Brocky

Brocky

Well-Known Member
SH Member
Joined
Sep 27, 2020
Messages
1,929
Location
de mitten
Tethers and LBs $9 each with $12 shipping, for first item, no extra for additional purchases. All are around 9’ in length.

IMG_7485.jpeg
1.-6mm Sterling XTec-Technora cover and core
2.-6mm Slick Line
3.-6mm DyTech
4.-6.8mm Poliwog
5.-SOLD
6.-7.5mm Bluewater Hybrid PER
7.-7.6mm CE4Y Quick Line-poly/aramid cover and dyneema core
8.-7.5mm Sterling FireTech 32, all Technora

IMG_7492.jpeg
1.-8mm Skylotec- poly/technora cover and Technora core
2.-8mm Polypropylene cover and 5mm Amsteel core
3.-8mm UltraTech
4.-9mm Pelican Ropes Static Master
5.-9mm Canyon Elite
6.-SOLD
7.- 10mm Pelican Ropes Static Master
8.-SOLD

IMG_7483.jpeg
1.-10.2mm Teufelberger Glider- all nylon
2.-10.5mm RnR Vulcanus- Technora cover and nylon core
3.-10.5mm Mammut Performance
4.-11mm KM III Max- lg. & small eye
5.-11.4mm Predator
6.-11.7mm Static X
7.-1/2” Pelican Ropes Static Master

IMG_7438.jpeg


Descender for 6mm rope Sterling XTec and 50’ of XTec- $35

Also selling the XTec by the foot for $.75
IMG_7072.jpeg


Petzl 4 meter, about 13’, wire core lanyard, the metal thimbles are covered, left the original plastic covers if preferred, or easily cut off-$20
IMG_7346.jpeg
 
Last edited:
Hey Brocky, I need a B 3, a C 3, an E 6 and that stubby figure eight with the antenna.

Send me the bill please...
 
I had to look that hitch up, I thought at first it was a Petroacan. I tried turning the hitches I know around 180 degrees awhile back and found the Gripper’s to work very good. The Gripper is at least 20 years old, I never tried it much.
This is how I quieted the fig 8, the small horn started fuzzing up the rope when I tried it for adding friction.


IMG_7396.jpeg
 
Another picture
IMG_7406.jpeg
Flex. Veritas. WarpSpeed. Armour Prus. ARC on top, and HRC
 
The stiffer the better, C-IV is fairly stiff, Skylotec in an 8mm, and Pelican Ropes 9.5mm Static Master are very stiff. Milking the slack out stiffens up most ropes also.
 
Brocky said:
The stiffer the better, C-IV is fairly stiff, Skylotec in an 8mm, and Pelican Ropes 9.5mm Static Master are very stiff. Milking the slack out stiffens up most ropes also.
Click to expand...
So b#2 or c#1 would work for the tethers then? Or the c-iv from group a
 
Status
Not open for further replies.
Back
Top