Bowhunter5262
Well-Known Member
- Joined
- Jul 7, 2019
- Messages
- 203
I live in Lamar county, and hunt Lamar, Spalding, and Upson countiesWhat part of Ga you in? I'm in Morgan county
I live in Lamar county, and hunt Lamar, Spalding, and Upson countiesWhat part of Ga you in? I'm in Morgan county
My parents live in Upson. I haven't hunted behind his house in 2 years. But the last time I did I pulled 6 deer out of 3 acres.I do a little hunting in Upson cty sometimes. I have family in Thomaston.
You will get there and set up at the right time soon! Stay optimistic, I couldn't get spun around on an old nanny Friday morning before she got downwind of me. She never blew, but trotted off in disgust!Was able to hunt yesterday evening and this morning. No dice yesterday. This morning I spooked them coming in and they circled back around, came downwind and busted me.
Sent from my SM-G970U using Tapatalk
Sweet action! You'll want to post it on the submission thread. Supposed to have a picture of the deer with the saddle in it and be sure to say it's for team 11. Way to get us on the board! I'm going to try to post a link to that thread below. https://r.tapatalk.com/shareLink/to...share_tid=18432&share_fid=104184&share_type=tI got a doe today in Nockamixon state park in SE PA. I posted about it in the hunting forum. I don't know if it has contest points.
Way to go! Break the ice for team 11!I got a doe today in Nockamixon state park in SE PA. I posted about it in the hunting forum. I don't know if it has contest points.
Nice..way to get some points going...our season doesnt open until nxt wkI got a doe today in Nockamixon state park in SE PA. I posted about it in the hunting forum. I don't know if it has contest points.
Thanks for posting the link. I did a full description in the hunting thread but I could not find the submission thread.Sweet action! You'll want to post it on the submission thread. Supposed to have a picture of the deer with the saddle in it and be sure to say it's for team 11. Way to get us on the board! I'm going to try to post a link to that thread below. https://r.tapatalk.com/shareLink/to...share_tid=18432&share_fid=104184&share_type=t
2019 Deer Contest Submission Thread
Sent from my SM-G970U using Tapatalk
Should be in the same section as our team threadThanks for posting the link. I did a full description in the hunting thread but I could not find the submission thread.
Awesome!I posted about my hunt here.
Electrical Rope Pusher Pole Success
I used my 10 foot electrical conduit rope pusher to push the rope up a tree. It worked. I shot a doe. Now I can try for the buck. My tether was set at 17 feet which seems kind of low but the leaf canopy was around there so I could not see as far if I went higher. It was so thick in there at...saddlehunter.com
Awesome! Let's get em!Hey guys. I’m from Illinois and just hunt my home state. Will be starting soon. GL and stay safe out there!
Sent from my iPhone using Tapatalk
Have you welded much? In order to get a strong bong you must melt the base metal. Moving the tip of the electrode in tiny circles is recommended. If your welder is just small you could try preheating with a propane torch. Your welds may be strong enough. I would beat it with a large hammer to try and break the welds. If you can't it should be good enough.Just welded up my primal platform!
I took my big hammer and gave it several good whacks! All's well. I don't weld much anymore, however I used to weld everyday for years. I have a 110 volt Lincoln mig welder at work I used. It does a decent job but the flux core wire sure pops alot. I haven't had an opportunity to stand on it yet.Have you welded much? In order to get a strong bong you must melt the base metal. Moving the tip of the electrode in tiny circles is recommended. If your welder is just small you could try preheating with a propane torch. Your welds may be strong enough. I would beat it with a large hammer to try and break the welds. If you can't it should be good enough.
I tried a separate wooden platform and the two separate pieces were too much for me. I attached an aluminum plate so I have one piece to handle on my Primal platform.