wayne r
Well-Known Member
- Joined
- Dec 28, 2018
- Messages
- 250
Hi Guys, I haven't been able to get on here of late, my wifes not been well so not had time for much DIY of gear but the last few days she has been doing really well so I managed to do some bits and bobs on a copy of sorts of @Weisman125 ozone unit, I had done some drawings of the unit and managed to set the printer to get it in motion, mk 1 needed some work and when the ozone unit arrived I realised I needed to mod the box, rather than lob it i decided to cut the pillers off that were supposed to hold the unit and make an adapter box to drop it in and screw that in, for my two mates who will trial them along with myself i updated the drawing and stl file for future refrence so it's all in one.
here's mk1
mk2
printer in progress
unit with fan and switches along with ozone unit fitted as is the mesh front, just hot glued inplace.
the ozone unit kicks out just a smidge more than the commecial unit so it should be good, I just need to locate my soldering iron to finish the wiring for testing, quite a simple little project and really pleased so far, I am loving the 3D printer which had been actioned for PPE for our local hospital but now stocks are doing well i thought a little me project was needed, regards wayne.
here's mk1
mk2
printer in progress
unit with fan and switches along with ozone unit fitted as is the mesh front, just hot glued inplace.
the ozone unit kicks out just a smidge more than the commecial unit so it should be good, I just need to locate my soldering iron to finish the wiring for testing, quite a simple little project and really pleased so far, I am loving the 3D printer which had been actioned for PPE for our local hospital but now stocks are doing well i thought a little me project was needed, regards wayne.
Last edited: