Thats what I wanted to hear!
-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
WindWalker Mods
- Thread starter Pathfinder
- Start date
Thats what I wanted to hear!
- Joined
- Dec 3, 2015
- Messages
- 3,505
I agree your also putting a lot of stress on 1/8 inch aluminum not alot of strength
- Joined
- Aug 27, 2020
- Messages
- 984
What are your thoughts on swapping out the stock strap and running a strap from EWO and an OCB through behind the plate like the original strap was? I didn’t mind the stock strap other than having to run it through the buckle and the noise from that bar inside the buckle.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Pathfinder
Member
I think the original works great honestly. Mine is a hook pinched tight to the plate and kinda like a rear seatbelt buckle for center passenger in my truck is best I can describe it. If that’s what you have then it’s easy to use can be switched to either side depending on your preference. Can’t be done on the fly but but I’m right handed so definitely prefer it one way. My original hook isnt tacked together so I wedged a screw driver and got hook to spread just wide enough that an XOP tree stand replacement strap loop should slide into hook. Then I’ll just wedge it behind plate and maybe wrap strap with a little gorilla tape to protect it from plate edges and I should have a brand new cam buckle tree stand strap. Might shrink wrap hook to so as to cover exposed metal not that it’s flopping around much but hey why not.
Brownie2111
New Member
If you happen to want to re home that loc on limit you have. I'd be interested in it for sure
- Joined
- Aug 27, 2020
- Messages
- 984
It sounds like mine has a different strap.
Functionality is great. The buckle is a little loud and you’ve got to thread it through when tightening it and thread it back out when taking it down. I may make another square plate and give the OCB strap a try.
Sent from my iPhone using Tapatalk
Pathfinder
Member
Ya it must be different. Mine really is a great design and could be used quietly with a little care but it stays threaded at all times so not fussing around.
parkersdad
Well-Known Member
- Joined
- Jan 7, 2015
- Messages
- 694
Mark sent me this photo last week. It is leveling for the windwalker. He said he hopes to have them ready for the first of September. They are modular so you can add it to the windwalker that you already bought from him.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Pathfinder
Member
No joke that would be awesome!!!! I’m in if those are available.Mark sent me this photo last week. It is leveling for the windwalker. He said he hopes to have them ready for the first of September. They are modular so you can add it to the windwalker that you already bought from him.
Sent from my iPhone using Tapatalk Pro
parkersdad
Well-Known Member
- Joined
- Jan 7, 2015
- Messages
- 694
No joke he said he hopes to have them in a month
Sent from my iPhone using Tapatalk Pro
Vtbow
Well-Known Member
- Joined
- Mar 21, 2018
- Messages
- 5,516
That's the same leveling setup that chippewa uses. Works well.Mark sent me this photo last week. It is leveling for the windwalker. He said he hopes to have them ready for the first of September. They are modular so you can add it to the windwalker that you already bought from him.
Sent from my iPhone using Tapatalk Pro
Pathfinder
Member
So here‘s my current state of mods
-replacement grade 8 bolts for platform cable mounts
-Stealth Strips around most of the stand
-pipe insulation around front seat bar
-Paracord Cobra wrap around front of stand for a “no look“ marker for my feet of edge of stand. Also I think it just looks good and I didn’t want to put more Stealth Strip out front.
-3 1/4x20 bolts w/nylock nuts on the tree V for bite against tree once cam’d over
-Rustoleum Patio spray paint brown and textured. Helps quite platform so wet boots don’t make squeaks. Like it better then the grey original too.
-also tightened top seat bolts a turn + so they now stick out of the nuts 1/4 to 3/8’s inch biting tree real good. Not a bat wing but very stable.
Pics show how I pack sticks on stand too. They are made to stack together on 1in square tubes and that just so happens to be what the seat tubes are. I attach them with 2-20in gear ties weaved around sticks and through platform mesh holding everything tight and solid. Then I take the tree strap and wrap that tight around sticks and seat tubes for double protection from moving. Total setup with sticks weights around 15lbs and that’s mostly the sticks.
Few wishes for future are replacement strap for tree strap. Original is in good shape and is gonna work but let’s face it straps 30yrs old time for replacement. Would like to extend seat fabric for more comfortable seat. My biggest want is a way to make platform adjustable and have a few thoughts, but in talking with Mark who makes the stands now there maybe a solution for that coming.
Having fun playing around with it and plan to use it in a hybrid style with my saddle as safety belt. I can get up easily 18ft with this setup and if right tree maybe 20ft.
-replacement grade 8 bolts for platform cable mounts
-Stealth Strips around most of the stand
-pipe insulation around front seat bar
-Paracord Cobra wrap around front of stand for a “no look“ marker for my feet of edge of stand. Also I think it just looks good and I didn’t want to put more Stealth Strip out front.
-3 1/4x20 bolts w/nylock nuts on the tree V for bite against tree once cam’d over
-Rustoleum Patio spray paint brown and textured. Helps quite platform so wet boots don’t make squeaks. Like it better then the grey original too.
-also tightened top seat bolts a turn + so they now stick out of the nuts 1/4 to 3/8’s inch biting tree real good. Not a bat wing but very stable.
Pics show how I pack sticks on stand too. They are made to stack together on 1in square tubes and that just so happens to be what the seat tubes are. I attach them with 2-20in gear ties weaved around sticks and through platform mesh holding everything tight and solid. Then I take the tree strap and wrap that tight around sticks and seat tubes for double protection from moving. Total setup with sticks weights around 15lbs and that’s mostly the sticks.
Few wishes for future are replacement strap for tree strap. Original is in good shape and is gonna work but let’s face it straps 30yrs old time for replacement. Would like to extend seat fabric for more comfortable seat. My biggest want is a way to make platform adjustable and have a few thoughts, but in talking with Mark who makes the stands now there maybe a solution for that coming.
Having fun playing around with it and plan to use it in a hybrid style with my saddle as safety belt. I can get up easily 18ft with this setup and if right tree maybe 20ft.
Pathfinder
Member
Between the tolerances being so tight on the stand offs and the Stealth strips I have all I can do to get them off at moment. The left side set is sitting hard against nuts on seat posts too. I’ll play a bit more though.
- Joined
- Aug 27, 2020
- Messages
- 984
Took the buttons off of mine today and put a strap from EWO on it.
It locks tight to the tree and has very little fiddle factor to it.
Going to build a new plat for it just to be safe since I drilled holes in this one for the buttons.
Sent from my iPhone using Tapatalk
It locks tight to the tree and has very little fiddle factor to it.
Going to build a new plat for it just to be safe since I drilled holes in this one for the buttons.
Sent from my iPhone using Tapatalk
So is Mark making the windwalker and limit again and selling them? I don't see them on the site.
You can contact him and he'll send them. I know I did so for a WW, but he mentioned LOC ON so I assume you can get the limit also.
Pathfinder
Member
I have a replacement strap from XOP coming with double loops. I tapped a steel tree felling wedge in my original hook and it will spread just enough to allow loop to go into center and since I have a couple of them once I get it started I can tap second one in and remove first and presto pretty much like original strap. It’s gonna be a little thicker then original so I may try and protect it a bit by wrapping some duct tape around the strap where it meets aluminum plate. That EWO one looks good though!!!Took the buttons off of mine today and put a strap from EWO on it.
It locks tight to the tree and has very little fiddle factor to it.
Going to build a new plat for it just to be safe since I drilled holes in this one for the buttons.
Sent from my iPhone using Tapatalk
Pathfinder
Member
Yup selling quite a few of them by the sounds of it. I think if he actually put them on the site open to the public he’d be swamped!!! You can get the pack from what I hear too which is made specifically for the WindWalker. Mark is super nice and easy to deal with!!!