• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

DIY Scent Crusher Ozone Tote (under $100)

always89y

Well-Known Member
Vendor Rep
SH Member
Joined
Jan 2, 2019
Messages
2,315
Location
Knoxville, TN
Didnt see this DIY build on the forum so I thought I would post it.
1. Getcha a tote

Sterilite 14699002 40 Gallon/151 Liter Wheeled Industrial Tote, Black Lid & Base w/ Racer Red Handle & Latches, 2-Pack https://www.amazon.com/dp/B00V87CQYM/ref=cm_sw_r_cp_apa_i_2c7yEbN8Q6TYG

2. Getcha an ozone machine

Robolife Ozone Generator Air Purifier Disinfector Air Water Sterilizer Fruits Vegetables Sterilization Ozonator https://www.amazon.com/dp/B01MTL2CU8/ref=cm_sw_r_cp_apa_i_Zb7yEbDXY9C8D

3. Drill a hole for the tube

4. Put in a couple of screws to hang the machine on. Use some sort of backing to stabilize it

5. Put the tube in and let it rip!

I put saddles, gear and clothing in for 5 minutes. The machine is separable so you can use in your hunting closet, truck, anywhere! I run it on an inverter in the van.

Heres the closet I use
Whitmor Deluxe Utility Closet - 5 Extra Strong Shelves - Removable Cover https://www.amazon.com/dp/B00HHLACP8/ref=cm_sw_r_cp_apa_i_YH7yEbCD57FCV

Basically all the same gear as commercially sold stuff.
fac253f0e7acccad2b07eec41c39ec4a.jpg
b0ff6ef160fea6a8779d1e3daa694be2.jpg
2ca7106bfdc4e15316ff790a1be44371.jpg
9e2521c4990b0fb57454d0835ab8b672.jpg
faeb9e6da551edc0355940c1ead1d7b7.jpg


Sent from my SM-G950U using Tapatalk
 
Very nice work! I’ve considered this but haven’t bitten the proverbial bullet on ozone treatment. Have you noticed any issues with elastic in your clothing? Or is the issue moot with 5 minute treatments? Certain rubbers are susceptible to ozone cracking which is why I haven’t jumped on the bandwagon. I wonder who makes a silicone waistband? https://en.m.wikipedia.org/wiki/Ozone_cracking#Susceptible_elastomers
 
Very nice work! I’ve considered this but haven’t bitten the proverbial bullet on ozone treatment. Have you noticed any issues with elastic in your clothing? Or is the issue moot with 5 minute treatments? Certain rubbers are susceptible to ozone cracking which is why I haven’t jumped on the bandwagon. I wonder who makes a silicone waistband? https://en.m.wikipedia.org/wiki/Ozone_cracking#Susceptible_elastomers
I havent noticed any degregation of elasticity in anything I have. Maybe its the short treatments. Hell, the tubing im using is silicone based and is still fine after 2 years of use.
 
Last edited:
Didnt see this DIY build on the forum so I thought I would post it.
1. Getcha a tote

Sterilite 14699002 40 Gallon/151 Liter Wheeled Industrial Tote, Black Lid & Base w/ Racer Red Handle & Latches, 2-Pack https://www.amazon.com/dp/B00V87CQYM/ref=cm_sw_r_cp_apa_i_2c7yEbN8Q6TYG

2. Getcha an ozone machine

Robolife Ozone Generator Air Purifier Disinfector Air Water Sterilizer Fruits Vegetables Sterilization Ozonator https://www.amazon.com/dp/B01MTL2CU8/ref=cm_sw_r_cp_apa_i_Zb7yEbDXY9C8D

3. Drill a hole for the tube

4. Put in a couple of screws to hang the machine on. Use some sort of backing to stabilize it

5. Put the tube in and let it rip!

I put saddles, gear and clothing in for 5 minutes. The machine is separable so you can use in your hunting closet, truck, anywhere! I run it on an inverter in the van.

Heres the closet I use
Whitmor Deluxe Utility Closet - 5 Extra Strong Shelves - Removable Cover https://www.amazon.com/dp/B00HHLACP8/ref=cm_sw_r_cp_apa_i_YH7yEbCD57FCV

Basically all the same gear as commercially sold stuff.
fac253f0e7acccad2b07eec41c39ec4a.jpg
b0ff6ef160fea6a8779d1e3daa694be2.jpg
2ca7106bfdc4e15316ff790a1be44371.jpg
9e2521c4990b0fb57454d0835ab8b672.jpg
faeb9e6da551edc0355940c1ead1d7b7.jpg


Sent from my SM-G950U using Tapatalk
Great job. I did a similar diy build last year. My only difference was that I used a 4”x 4” heavy duty Velcro to attach the ozone machine to the tote.
 
I havent noticed any degregation of elasticity in anything I have. Maybe its the short treatments. Hell, the tubing im using is silicone based and is still fine after 2 years of use.

Silicone happens to be one of the ozone resistant rubber substitutes.
 
I have two of those storage tubs for most of my stuff. They are awesome! Looks like I might have to modify one. Thanks for sharing!
 
Back
Top