• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Heavy arrow build thread

bowhunter15

Well-Known Member
Vendor Rep
Feb 1, 2016
646
645
93
Should pretty simple to test if anybody's got 2 bows ....maybe the wife's 40pd shooting the same arrow as ur 70pd and measure the difference
When I shoot my wife's bow with 450gr arrows vs my bow with 450gr arrows, mine penetrate significantly further. Probably more than double if I measured it. Same thing with my traditional bow.

Sent from my SM-G975U using Tapatalk
 

bowhunter15

Well-Known Member
Vendor Rep
Feb 1, 2016
646
645
93
I think a more apples to apples comparison for the Mythbusters test would be if they compared shotgun slugs with varying amounts of powder at subsonic speeds.

Sent from my SM-G975U using Tapatalk
 

Gator

Well-Known Member
SH Member
May 20, 2019
2,476
3,362
113
Virginia
When I shoot my wife's bow with 450gr arrows vs my bow with 450gr arrows, mine penetrate significantly further. Probably more than double if I measured it. Same thing with my traditional bow.

Sent from my SM-G975U using Tapatalk
Same here. I have two Mathews, new VXR and my old DXT. New faster bow out penetrates almost every time. I assume the few times it doesn't is because the old bow hit a nice pre-existing hole or something.
 
Last edited:

paxamus

Well-Known Member
Oct 28, 2018
288
97
28
46
Just got through putting some more arrows together. Sirius Apollo’s 250
570 grain
278 FPS
Kinetic energy 97.8 foot pounds

Out of a Hoyt Hyperforce 82lb draw weight 28.5 draw length


Sent from my iPhone using Tapatalk
 

Allegheny Tom

Well-Known Member
SH Member
Feb 4, 2018
6,079
10,265
113
Western Pennsylvania
I was perusing around on the Ashby Bowhunting Foundation website yesterday and found this interesting webinar. There are probably 5 different threads where I could post this.
 
  • Like
Reactions: Kurt

LilBit

Member
Dec 14, 2018
54
52
18
Indy
Its been awhile since I've been on the forum but what's been everyone's results with their heavy builds? I got my first pass through on a fat hoosier doe a few weeks ago. Buried in the dirt about 10" deep, 5-10' past where she was standing after blowing through both shoulder blades. She went down 30-40 yds away.
 

Allegheny Tom

Well-Known Member
SH Member
Feb 4, 2018
6,079
10,265
113
Western Pennsylvania
There's a new Ashby podcast on The Meathunter. It's pretty good. I've followed just about everything Ashby has done and I still learned a few new things about him and his studies on this podcast. Good things going forward for the Ashby Foundation.
 

Weldabeast

Well-Known Member
SH Member
May 23, 2019
12,570
26,190
113
Northeast Florida
They spoke of it in the podcast but I haven't seen it mentioned to much here on SH.....the doe I killed last season was a textbook broadside double lung. I had exactly what Dr was describing....lungs looked like jello and it looked all bloodshot like it was shot with a gun. It was raining when I was cleaning so I wasn't able to take any photos unfortunately
 

weekender21

Well-Known Member
SH Member
Aug 19, 2018
1,556
1,607
113
45
Hawaii and North Carolina
@Allegheny Tom ....that was a good 1, thanks

I'm super interested to hear more about the lower poundage bows getting more pass thru vs higher poundage bows

My wife had a complete pass thru on a hog shooting 34 pounds with a 23” draw. She was shooting a 4 blade slick trick with an arrow under 300 grains total weight so I guess not entirely relevant to this thread. It was a “smaller” hog.


Sent from my iPhone using Tapatalk
 
Last edited:

woodsdog2

Well-Known Member
SH Member
Jun 28, 2019
8,170
10,409
113
I'm about halfway through before I had to get to work. Fascinating information so far. Well worth the listen to anyone really. Faster arrow, more resistance.... makes sense and I never thought about that. "There is something going on there." The Ashby Foundation is on cutting edge information. I really enjoy the aeronautical parallels regarding FOC.
 
  • Like
Reactions: Weldabeast

Weldabeast

Well-Known Member
SH Member
May 23, 2019
12,570
26,190
113
Northeast Florida
Also looking forward to some high speed slow mo single bevel bone splits. That is gonna be sweet footage

I originally lowered poundage from 70 after starting to saddle hunt. I had some difficulty drawing in certain awkward positions so I started dropping draw weight. Arrow weight was increasing so 70pds wasn't needed. 40pds is "state minimum required" to "legally" bow hunt and I'm tempted to drop down to that.

Online cacumalaters are saying I'll have 8pounds of kinetic energy.....hahahahaha.... Can't even kill a squirrel with those numbers
 

J.P.

Member
Jul 6, 2021
66
59
18
34
Going heavy this year as well.

Easton Axis 300 @ 28” carbon to carbon
Ethics 100grn static outsert = 28.5” finished length
560-585 TAW depending on broadhead, but will be 125-150 single bevel.
 
  • Like
Reactions: Mr Price