-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Thread for sewing seatbelt webbing
- Thread starter UMICH1
- Start date
So are you sewing a piece of webbing onto the Anderson to serve as a permanent bridge? If so, That needs to be very carefully thought out. Can you post a couple of pics showing your plan. If you're doing what I think your are doing, I wouldn't use ANYTHING less than a T90 thread with the appropriate type of stitch. I'd actually prefer a T135. Your mom's machine likely will not run either unless it's an industrial.
Ok, so basically 2" webbing passed through a metal slider, and then sewn back onto itself. That's a good way to do it. It allows you to have a good amount of stitch-able area for your bar tacks/box stitch/zig zags. I still HIGHLY recommend T90 thread or bigger. If you're having any reservations at all, please PM me. You can't afford for these two sets of stitches to be inferior in strength in any way. I'd be happy to help you out with this.