So, I just ran across this video. This solves half the problem of 2 locking brummel splices. You can use this method if you want to have a non-fixed bridge. Use a carabiner for the second side and avoid the lock stitch. I’m sure other people have seen this and used this method. Just trying to pass along what I found myself.
-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Amsteel bridge
- Thread starter Bowhunter41002
- Start date
amsteel is super easy to work with, watch a couple vids and you can figure it out.
does it really matter if my linesman belt is bright green? I have a tree climbing system for pruning my trees, and I want to use some of that gear untill I can get deidicated gear. That way I can use my hhs short rope as a feather, and put an Amsteel bridge in place of the webbing bridge on my harness. My webbing bridge is great for tree climbing, but it’s a little short for hunting.
No, it does not matter about the color. Many of have shot deer with safety orange on while they are 15 yards or less away. I'm sure the color of the bridge is inconsequential. Besides they'll mostly just see the dark shadow or silhouette. What may be more important is the smell of your tree pruning gear, but if you use the wind right as we alsways should then even that is a non issue.
Yes. That is what I'm using for now until I figure my permanent bridge. Just make sure to tie a stopper knot.
How long does an amsteel bridge last? Indefinitely? How often do folks replace their bridgr?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Not sure, but mine still looks great. This stuff is tough, but I'm not sure what signs of excessive usage will look like. I upgraded my sticks from rope to amsteel cause my cam over amsteel rope on my platform still looks great as well. First time you try to cut this stuff with scissors you realize it's tough. Lol
Question for you guys using a whoopie on your bridge...
Where exactly are you locating your bury? The reason I ask is because of the way the whoopie bury "travels" when you adjust it. If its located too close to the loop, you can only shorten it so much before the bury jams into the loop. But if you locate the bury farther from the loop, do you have any issues with the bury (and tag end) sliding thru the carabiner?
The one thing I like about a fixed Amsteel bridge is that the carabiner can slide along entire length of the bridge with no knots or anything to restrict carabiner travel. The carabiner can fully go loop-to-loop. I can have a shorter bridge if it's 100% "useable".
I tried @DaveT1963 recommendation of using a very low tether attachment and I like it. But a low tether requires a shorter bridge or there is less space on the rope for adjustment.
I like the idea of a whoopie bridge...just wondering if there is a downside to it.
Where exactly are you locating your bury? The reason I ask is because of the way the whoopie bury "travels" when you adjust it. If its located too close to the loop, you can only shorten it so much before the bury jams into the loop. But if you locate the bury farther from the loop, do you have any issues with the bury (and tag end) sliding thru the carabiner?
The one thing I like about a fixed Amsteel bridge is that the carabiner can slide along entire length of the bridge with no knots or anything to restrict carabiner travel. The carabiner can fully go loop-to-loop. I can have a shorter bridge if it's 100% "useable".
I tried @DaveT1963 recommendation of using a very low tether attachment and I like it. But a low tether requires a shorter bridge or there is less space on the rope for adjustment.
I like the idea of a whoopie bridge...just wondering if there is a downside to it.
I wonder if waxing Amsteel like we do a bowstring would be of any benefit?? Not only for rope longevity but also to keep it slick and slide through the carabiner easier?? I don't think I would use synthetic wax because there may be an ingredient in it harmful to the rope?? IDK. But I would consider trying the 100% wax like the pure TexTite stuff.
Any thoughts on this from the Amsteel experts?
The bury is right by one of the saddle loops, giving lots of travel. Im using 3" and it hasnt moved a bit. Im currently at 28", but have a 19" tail if I wanted to really open it up. Could I get by with a fixed, sure, but would have to stitch one end or use a biner. I might go to a biner only because it would eliminate me needing a separate bridge and 2 biners when I use my HBS. Changing bridge length does change pressure points and I do change it on long sits occasionally. As for my tether height, Im staring right at the tether ring around the tree. The distance from my ropeman to the ring is fairly short. Im only adjusting the height of that occasionally to reduce leg fatigue as Im mainly a stander using the saddle as a means to keep from falling when I lean out.