Spartan
Well-Known Member
- Joined
- Dec 2, 2021
- Messages
- 469
Starting to get some fraying to the point they need to be replaced, but also want them longer. Muddy sells them with ropes that are stupid short.
Anybody tackled this already? Wanted to see if any pointers before I start cutting. Curious if the rope is just knotted and then glued into that void, or if there is a post of sort that it is tied around. Hard to tell.
The OEM ropes look to be pretty generic static line that is right at 9mm, so planning to use Canyon C-IV as the replacement unless someone has a better recommendation.
Thanks for any tips.
Anybody tackled this already? Wanted to see if any pointers before I start cutting. Curious if the rope is just knotted and then glued into that void, or if there is a post of sort that it is tied around. Hard to tell.
The OEM ropes look to be pretty generic static line that is right at 9mm, so planning to use Canyon C-IV as the replacement unless someone has a better recommendation.
Thanks for any tips.