robertreed711
Well-Known Member
- Joined
- Aug 1, 2019
- Messages
- 237
Paint looks good bud. No clue on the paracord, I use the double step mainly when rotating around and just haven’t felt the need for anything else, so far... I did add some sand when I painted mine though
Sent from my iPhone using Tapatalk
Any thought on where I can get the tree brackets/stand offs for cheap without access to a machine shop?
When did you get the seat?www.doublesteps.com will have everything you need other than the seat.
When did you get the seat?
Ebay was where I get most of them. You are looking for a shop rider foot platform. The post is 11/4" and the versa button is ? . Usually a little below the versa button which allows the strap to hold the upper cleat tighter to the tree . The lower cleat on a 8 " post should be closer to the bottom of the post and platform slightly above it or below it depending on where the adjustment bolt hits the post and how you deal with it. Good luck with your build and feel free if you need anything else . Glad to help out.@SloMo i want to make a “wheelchair” platform like yours. What post length do I need? Where do you mount the platform and versabutton?
I like to mount the platform a couple of inches up from the bottom and the versa button a couple inches below the upper standoff . You will need to mess around a bit and hopefully you will find the sweet spot quickly. Some of mine I used the versa button and the standoff on the same bolt on top. Just keep in mind the strap will decide the sweet spot . Once you get your build right you will love this platform. Good luck.@SloMo so I should use a 8” post? Is there a specific spot to mount the platform and versabutton or do you just eyeball it’s placement?
Beautiful work @robertreed711
Now you have a season of use, could you or @shwacker confirm with the top double step is overly beneficial? Just trying to cut some weight if possible. Thanks!
I like it, it’s an extra pivot point if rotating around the tree. And you will get some foot fatigue and the step just gives more places to put your feet. I often have my heels on the platform and toes on the step. Puts my feet at a 45 and a more natural position when you’re leaning. It’s about 5oz if I remember right. I think the whole think was 3.75... so not a huge difference, but up to you and you can always add later. I believe DanO sells a step that’s 1.25” milled.
Sent from my iPhone using Tapatalk