How long a piece did you start with for the prussic? How long did you bury the tails?This is what I ended up with. Full bury up to the double overhand knot. Then locked brummel splice with continuous loop to the linemans loop. Loving it so far! View attachment 24012
Do a locked brummel and then do a full bury of both tag ends. Should be no way for the buries to come out this waySo when you guys are making the continuous loop for the prussic, are your tails buried so that the prussic piece has that doubled thickness like the 1/4 inch utilibridge?
Also do you guys have any problems with your buries working there way out? Seems like when the continuous loop isn't loaded the buries work out pretty easily
Saw this on Facebook this morning. Seems like it matches what is on the Phantom.
Do a locked brummel and then do a full bury of both tag ends. Should be no way for the buries to come out this way
You could use it. If its a few years old and has been put through the elements some I'd think twice about it. I snagged some of this off amazon and used it all season as my bridge.Sorry if this has been answered before... I AM CHEAP and DIYing my own saddle. I am wondering if anyone has used the Muddy Safe-Line as a bridge? It is good enough for a fall arrest system it should be good for a bridge right?!?
Thanks in advance!
You could use it. If its a few years old and has been put through the elements some I'd think twice about it. I snagged some of this off amazon and used it all season as my bridge.
Are you thinking of making the dog bone and attaching it to your saddle and then attaching the prussic to that? I was going to do that with extra long bury and a 28 inch dogbone (end to end) with 1 normal bury and an extra long bury on the prussic side.
Sent from my iPad using Tapatalk Pro
Yes, I am trying to decide what to do. With a dogbone you could girth hitch one end or use a carabiner and you can secure the tag end as well.Are you thinking of making the dog bone and attaching it to your saddle and then attaching the prussic to that? I was going to do that with extra long bury and a 28 inch dogbone (end to end) with 1 normal bury and an extra long bury on the prussic side.
I just haven't had any time to fabricate another saddle and get this done.
Sent from my SM-G973U using Tapatalk