-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Does anyone- tether question
- Thread starter noxninja
- Start date
Standard carabiners can get a little squirrelly with this...getting side loaded or the rope is pulling your gate open. Mess with it at ground level so you see how it can go wrong.
Steel Delta Screwlinks are generally recommended for this but aren't as convenient. One bad thing is that your tether falls very easily when unloaded. A good thing if you are doing a rappel descent and want to retrieve your rope easily.
Steel Delta Screwlinks are generally recommended for this but aren't as convenient. One bad thing is that your tether falls very easily when unloaded. A good thing if you are doing a rappel descent and want to retrieve your rope easily.
What justsomedude said is spot on. There are screw links made for this but IMO for our purposes what you're doing is better and lighter.
This is how Butch does the stock Quido'sWeb tether which is made from seatbelt strap.
Ok forgive my ignorance but what is a delta link?
Sent from my iPhone using Tapatalk
One of these guys. Just make sure you get them from a climbing/arborist site so you don't end up with the uncertified chinese ones.
Can we get this turned into it's own thread? I think it would do some good for the new people and maybe a couple of the old.
Done and made a sticky in the climbing methods section.
These work good, I've been using them and they're extremely strong.
http://www.ebay.com/itm/Maillon-Rap...755289?hash=item2a3ff6a599:g:3yYAAOSwFL9Tvhjs
http://www.ebay.com/itm/Maillon-Rap...755289?hash=item2a3ff6a599:g:3yYAAOSwFL9Tvhjs
Hmmmm....now I'm thinking... with a fixed webbing loop sewn to the inside of my RC harness with small 'pencil' sized loops left at each hip. I could snake these around my harness belt & through the webbing loops and have a nice linemans belt....and just remove the deltas when I want to rock climb.
If you got smallish Aluminum ones it might be good. Do you mean to use them as if you had "D Rings"?
I don't know how much you would want to do that. The forces involved in rock falls are way higher than what we are generating. That and most RC harness now a days aren't a solid piece of webbing to sew to all the way around. Not to mention if you modified equipment fails any accidental death benefits your family might receive might be nullified if you die. Rock climbing is inherently dangerous and harness are relatively cheap. I may mix and match biners but I keep my ropes and harness separate from my tree gear.
Not to mention, have you smelled a RC harness after a season of climbing? A deer might very well be able to smell mine passing overhead if we launched it into a low earth orbit.