Comanche50Bravo
New Member
- Joined
- Jul 6, 2017
- Messages
- 25
anyone done this and if so could you post pics/ descriptions etc.
This is an excellent mod when I get home this afternoon I will post pics if someone has an already posted by thenanyone done this and if so could you post pics/ descriptions etc.
Thanks great pics this will help out a bunch! How long are your ropes? And how high can ubget with those four steps?! Also how long of a rope are using!! 8mm acc cord from pmi is what i ordered!Here is mine. I used a 5/16 bolt and fender washer. cut a short section of 3/8 metal pipe to make a spacer. I later then cut my steps down to a 2 step stick to shave weight and use aiders.
Sent from my SM-G930R4 using Tapatalk
I went with the versa buttons myself still waitn on them in the mail may DIY and send them back!I have all the hardware, just need to throw it together.... i have lone wolf versa buttons, and the 7mm pmi accessory cord
Kinda what i thought and quieter than steel.The versa buttons are cheap enough and well worth it IMO.
Quietness and weight were the reasons I did it. More for noise than anything else.What does the rope mod do for you above and beyond what staps already provide?
I cant imagine it could be more secure, possibly some weight and quietness, am I nuts?
Sent from my SM-S820L using Tapatalk
Quietness and weight were the reasons I did it. More for noise than anything else.
Sent from my SM-G930R4 using Tapatalk
Yes Amsteel will work. I use it with a spliced loop on a versa button attached to my helium sticksWould amsteel work?
When you remove your strap the bolt you use to create your button will go through the same hole. Now that I think about it I think it was a 1/4" bolt. If you make your own spacers be sure they are the right length so the rope binds as you put weight on your steps. I am using 7mm rope. It does seem to stretch a bit. I might would up the size to 8mm if I was to do it again..
Sent from my SM-G930R4 using Tapatalk