We have a detailed knot tying playlist now.
Sent from my SM-G975U using Tapatalk
Sent from my SM-G975U using Tapatalk
My pleasure and thanks. In terms of your hitch, it's hard to make an accurate assessment without seeing it or what you're doing. Are ya using a 523? Standard or bridge mode? Photo?Hey John, I know I'm late to the game here but you seem to really appreciate feedback and helping us out.
I tried your ascender in an SRT set-up. It worked great!! Thanks for all your work! I would love to see a version I could take on and off the rope, just personal preference, there's absolutely nothing wrong with it now.
I tied both 7 and 8mm versions to use on 11.4mm rope. In the house 7mm was the clear winner, 8 was a little mushy. After 5 or 6 climbs the 7mm got pretty tight, not so tight that I couldn't move it but much, much tighter.
I had planned to switch to the larger cord and try again, thinking the 8mm might be better with that extra tension but I see it may be from rappeling. I use a mechanical descender and just drag my hitch back down, unloaded. Could this be tightening my hitch up?
I had a left hand knot, no toggle/handle using phantom climbing rope and sterling accessory cord. I've also taken that knot off my line already so unfortunately I can't offer pictures but I'm confident it was tied properly.
Thanks and sorry for the long post
No problem. I do try to take my time before posting new content. And when i did the first video, i used a 413 or 513. It was only a week later that i was getting feedback that the 423 and 523 were preferred by more folks and this was one of the reasons: better independence from jamming.4-1-2 i think, It was the original variation I believe. I'll give that a try, I haven't had time to watch your new video, I should have checked it out before I asked. Thanks for your help!