• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Srt Rappelling With Limbs

Wirrex

Wirrex

Moderator
Staff member
SH Member
Joined
Oct 8, 2016
Messages
2,237
Location
Wisconsin
Is this possible? This is my first season rappelling and I haven’t had any luck getting my line back with limbs on the tree. It doesn’t seem like it can be done with my setup having two prusiks on the line.


Sent from my iPhone using Tapatalk
 
I new to the saddle but not new to rappelling, why would you have 2 prussics for a rappell? I can see one for the "brake strand" not sure where the 2nd one fits in & after you reach the ground the prussics would be removed to pull the "clean" rope out of the tree. Maybe I am missing something & somebody else can give some insight.
 
I guess your need toale sure your routs down is direct and not windy around the branches
 
Ctclimberguy42 said:
I new to the saddle but not new to rappelling, why would you have 2 prussics for a rappell? I can see one for the "brake strand" not sure where the 2nd one fits in & after you reach the ground the prussics would be removed to pull the "clean" rope out of the tree. Maybe I am missing something & somebody else can give some insight.
Click to expand...

I have two because the rope doubles as my tether. I guess that’s the solution... pretty obvious. Maybe it is finally time I beak down and buy a ropeman or two.
 
Ok rope is your tether. Attach ATC,Gri Gri ,munter etc to . put prussic/autoblock on brake strand (for safety) remove your other attachment points to rope , slide down rope.Remove rappell device & autoblock.Pull clean rope from tree. I'm not really sure how an extra ropeman is going to help you.
 
I know what's happening and I had the same issue. Instead of cinching the rope at the top of the tree. Bring the rope all the way back down to he ground level. Wrap it around the truck and tie it off at the base. When you rappel down undo the rope at the base and pull it back up and down to you.


Sent from my iPhone using Tapatalk
 
Ctclimberguy42 said:
Ok rope is your tether. Attach ATC,Gri Gri ,munter etc to . put prussic/autoblock on brake strand (for safety) remove your other attachment points to rope , slide down rope.Remove rappell device & autoblock.Pull clean rope from tree. I'm not really sure how an extra ropeman is going to help you.
Click to expand...

It’s a pain dressing those prusiks every time. That is why I don’t want to take them off. I was thinking a ropeman would be easier install/remove than a 8mm prusik. Buy I have never used one.
 
Ky.Mike said:
I know what's happening and I had the same issue. Instead of cinching the rope at the top of the tree. Bring the rope all the way back down to he ground level. Wrap it around the truck and tie it off at the base. When you rappel down undo the rope at the base and pull it back up and down to you.


Sent from my iPhone using Tapatalk
Click to expand...

I like your solution but that is a lot of rope and more weight.
 
Ky.Mike said:
I know what's happening and I had the same issue. Instead of cinching the rope at the top of the tree. Bring the rope all the way back down to he ground level. Wrap it around the truck and tie it off at the base. When you rappel down undo the rope at the base and pull it back up and down to you.


Sent from my iPhone using Tapatalk
Click to expand...
This is an option, but not necessary.
 
Wirrex said:
Is this possible? This is my first season rappelling and I haven’t had any luck getting my line back with limbs on the tree. It doesn’t seem like it can be done with my setup having two prusiks on the line.


Sent from my iPhone using Tapatalk
Click to expand...
Can you post a photo of your set up so we can see what you are doing? There are lots of threads on how to do this so you must be doing something different. Are you sure you're doing SRT? Basically you hook the rope around the tree at hunting height and attach some second rope such as paracord to your screw link while you are at the top. When you get to the bottom you pull the paracord which will pull the screw link and you just pull the entire setup down. Having lots of limbs on the tree really shouldn't affect this much.
 
Red,

But if you leave a prusik in the way, you can't pull the rope all the way through. I think that's what he is saying
 
justsomedude said:
Red,

But if you leave a prusik in the way, you can't pull the rope all the way through. I think that's what he is saying
Click to expand...

Good call. That didn't click for me. Probably because I have only hung on a prussik once lol.
 
Yes, I was leaving the prusik on. I use 8mm rope for them and it’s a pain to reinstall them. It is very stiff. Maybe there is a better and faster option for prusiks.


Sent from my iPhone using Tapatalk
 
Use an auto block instead of a prussik.
 

Attachments

  • B667E9E2-DEB2-47BB-8CC5-085A75CA7222.png
    B667E9E2-DEB2-47BB-8CC5-085A75CA7222.png
    573.2 KB · Views: 14
You must log in or register to reply here.
Back
Top