wayne r
Well-Known Member
- Joined
- Dec 28, 2018
- Messages
- 250
So after going to my local 3D shoot and letting a few mates try out my Kestrel clone they are hooked and we decided or rather they did that I would make them a mesh saddle.
So I actually wanted to have a go as I already had loads of material and set on today.
I cut out a shape in paper and stuck it together so I had a pattern for all three
edged with brown grosgrain.
you can see just with the grosgrain how its already holding a cupping shape. I will use maroon seat belt webbing
now I have a question what size cobra buckles do you guys use, my kestrel i used a harness webbing and buckle so this will be my first time using them, regards wayne
So I actually wanted to have a go as I already had loads of material and set on today.
I cut out a shape in paper and stuck it together so I had a pattern for all three
edged with brown grosgrain.
you can see just with the grosgrain how its already holding a cupping shape. I will use maroon seat belt webbing
now I have a question what size cobra buckles do you guys use, my kestrel i used a harness webbing and buckle so this will be my first time using them, regards wayne
Last edited: