• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Recent content by Vallefuoco74

  1. V

    New SH from Central Indiana

    Welcome man, NW Indiana here
  2. V

    Tethrd One Stick Gen 3's - Season review so far

    Here ya go…hope this helps
  3. V

    Tethrd One Stick Gen 3's - Season review so far

    yes, it’s for one sticking
  4. V

    Tethrd One Stick Gen 3's - Season review so far

    another member asked about changing out the tethrd cleat to a harken 150….which I did. With that said, I also swapped to a 3/16 amsteel rope. Only hung from the ground so far but haven’t done any climbing….feels solid though
  5. V

    Cam cleat to Tethrd 1 stick GEN3

    Lol, I may go that route of drilling a small hole into the end cap big enough for the spray tip…. I’ll wait and see if I have any noise issues. @Plebe I know, I completely disregarded the warranty… I’m okay with that. In the end, if this setup doesn’t work, I’ll just purchase another single...
  6. V

    Cam cleat to Tethrd 1 stick GEN3

    Not sure how thick the tube walls are, I’d have to get out the calipers to measure. My guess would be approximately 1/16”. Seems pretty solid with the cam clear instslled. Installing an aluminum tube on the inside isn’t a bad idea, however, when I contacted tethrd to remove the end caps ( wanted...
  7. V

    Cam cleat to Tethrd 1 stick GEN3

    Definitely bulkier no doubt, but I think it’ll simplify transitioning and moving the stick. Hope this helps. Also providing pictures with the factory tethrd cleat removed and also harken installed. Where I removed the old cleat, it still has residual glue or adhesive if anyone is wondering
  8. V

    Cam cleat to Tethrd 1 stick GEN3

    @27travis Hahaha yeah man, same thing. I realized beforehand that I wouldn’t be able to stack multiple sticks. I did get a 40’ rope with the madrock safeguard. I knew that was going to add a bit of weight, but my goal was to either eliminate a pack or keep it significantly lighter. I’m either...
  9. V

    Cam cleat to Tethrd 1 stick GEN3

    Exactly what my end goal was/is. I was tired of lunking in a 20lb climber stand on public land, plus my pack and all my layers. My objective was to shed as much weight as possible. If the single stick doesn’t work out and becomes more of a hassle while climbing, then I’m open to trying multiple...
  10. V

    Cam cleat to Tethrd 1 stick GEN3

    Just replying to the OP question of whether or Not anyone has done it before….there’s not much info out there or YouTube videos of it being done on the tethrd one stick. If anyone has any mechanical or fabrication skills whatsoever, they can do this swap. I’m just pointing out what to look out...
  11. V

    Cam cleat to Tethrd 1 stick GEN3

    I agree, however, I only bought a single stick for this exact purpose. I’m adding 5 ounces, but I’m also only using one stick and not 3 or 4 sticks like some folks. I wanted to see if it was more functional and simplistic when it came to transitioning the stick higher with a cam clear rather...
  12. V

    Cam cleat to Tethrd 1 stick GEN3

    I bought the OOAL adapter and harken cleat and replaced Tethrd’s cleat. Biggest pain in the ass was removing the tethrd cleat. Ended up using a band saw to it being extra careful not to cut into the stick. Behind tethrd’s cleat was a factory drilled hole that I ended up using as one of the holes...
  13. V

    Newbie…bow hanger question

    Ok thanks, I’ll definitely look into that
  14. V

    Newbie…bow hanger question

    Anyone running a fixed or detachable mathews low pro quiver with tethrd’s bow hanger? Trying to find options without hanging my bow from my limb or cam. If so, please send pictures of your setup
See more
Back
Top