Adding structural integrity to material

[Peterk1234]

I need the help from some sewing gurus. I added webbing bands/stringers to my diy sitdrag in order to eliminate even the slightest stretch in the material. It has worked very well. But it got me thinking. Could I achieve the same result by making a sitdrag out of multiple panels? And how should those panels be cut? Any input really appreciated. Pete

 

[ImThere]

That’s how the kestrel is built one panel inside another panel. Or at least that’s how it appears


Sent from my iPhone using Tapatalk

 

[Peterk1234]

That’s how the kestrel is built one panel inside another panel. Or at least that’s how it appears


Sent from my iPhone using Tapatalk

Is it two layers thick, or do you mean two panels sewed side by side with a big over lap? Thx Pete

 

[ImThere]

Two layers thick. The out side is thick predator camo and the inside is green if I remember a different material. I will pull it out at home if I get home at a decent hour tonight.


Sent from my iPhone using Tapatalk

 

[EricS]

Two layers thick. The out side is thick predator camo and the inside is green if I remember a different material. I will pull it out at home if I get home at a decent hour tonight.


Sent from my iPhone using Tapatalk

There are only two sewn with predator camo.

 

[LeanMachine]

Curious why you are wanting to eliminate the stretch. Should get a little bit of added comfort from that stretch. That's why folks talk about diy fleece saddles being so comfortable.

Sent from my SM-G950U using Tapatalk

 

[BudgetBuck1]

Cut them the same dimensions....sew them inside out.... rotate the inside out after sewing three sides so that the corners look good and even. You could also do yourself a favor and place some foam in between the layers(with a sipper on one side). It is muuuuuch more comfortable that way. Here is the one I am using currently...an improved sit drag with adjustable back brace. Currently working on an upgraded model but this one worked great for a season with no visible wear. Used 500D backpack material for the outside and fleece on the inside.

 

[Peterk1234]

@BudgetBuck1 , interesting idea. Are you using sleeping pad foam, you know the inexpensive blue stuff you can get at Walmart, or something else? Pete

 

[BudgetBuck1]

I did use some from walmart. It wasn't sleeping pad foam. I tried some dense, firm foam and didn't like it. I then tried some looser, softer foam that was around 1.5 inches thick and it was much more comfortable. It was in Walmart at the section with pillows and sewing supplies.