• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Cruzr ANSI Cobra Prostyle buckle - straps loosening

wihunter50

wihunter50

Member
Joined
Dec 15, 2020
Messages
78
Anyone using the cobra buckles on their saddle and having a hard time keeping the waist belt and leg straps from loosening? Any suggestions on how to remedy? I am having a hard time moving around and walking while wearing the saddle without it loosening and sliding down. Not a problem when in the tree but hoping to wear the saddle during my walk into the woods. New to saddle hunting and this is my first saddle so just practicing my routine. Thanks,
Jason
 
I have had this problem on a DIY saddle I made - basically the webbing is too thin. I sewed on an extra loop of webbing to make it thick enough to hold. I don’t think you should have to do that for a commercial saddle - I would contact Chad at Cruzr and ask for a fix.
 
I put a triglide on the left side of the buckle and have had no problems since. It makes adjustments a little more difficult but it’s not going anywhere once you set it. The right of the buckle has a triglide that’s why that side doesn’t slip.
 
Thanks for the comments. Cruzr sent me a triglide to attached to the female side of the buckle. I anticipate this will solve the issue since it worked for MSbowhunter48.
 
You must log in or register to reply here.
Back
Top