• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Lone wolf assault tube dimensions?

Deano0686

Deano0686

New Member
Joined
Aug 11, 2019
Messages
6
I’m sure there’s many on here that have completed this task. I’ve searched YouTube but can’t find anyone giving exact dimensions on where to drill on an aluminum tube to make your own platform. I’ve gathered that most use a 1 1/4 inch square tube 1/8 inch thick around 9 inches in length. I also have gathered that you need to reinforce the spot where your bolt from the seat makes contact with the tube. But if anyone could give me the measurements (from the top) they made the holes for the seat and also standoffs on the top and bottom. I would also be interested if guys liked a versa button in the middle to secure or a strap that cams over the seat. Any help would be appreciated!
 
You need to cam it

Brackets are flush or 1/4 inch from flush on each end.

Seat should be centered, hole is maybe 3/4-1 inch north of center. Just mark center, put the seat to it then mark your hole. Doesn’t have to be dead nuts


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top