When did you place order?
#473
June 16 I think
Sent from my iPhone using Tapatalk
When did you place order?
Good deal, I’ve got the same one on the way#473
June 16 I think
Sent from my iPhone using Tapatalk
Thanks for posting. I was really on the fence about the black vs. grey mesh since there were not photos on the site a little while back.
I’m digging this XC
Good deal, I’ve got the same one on the way
36” waist 225 hope I made the right choice
Thanks for posting. I was really on the fence about the black vs. grey mesh since there were not photos on the site a little while back.
I really like the gray
Add a couple stripes with sharpie like someone mentioned if u wanna break it up a little
Sent from my iPhone using Tapatalk
I was the one that suggested it originally, and after doing so, I messaged Chad to ask what he thought about it. He advised against it, saying Sharpies can damage the mesh. He recommended using Rit Dye for Synthetics, if anything. If you decide to take the Sharpie route, I'd suggest a small test spot before going all out. Another option would be to fasten a patch of an old leafy suit or blind on there--wouldn't add hardly any weight or heat.I really like the gray
Add a couple stripes with sharpie like someone mentioned if u wanna break it up a little
Sent from my iPhone using Tapatalk
I was the one that suggested it originally, and after doing so, I messaged Chad to ask what he thought about it. He advised against it, saying Sharpies can damage the mesh. He recommended using Rit Dye for Synthetics, if anything. If you decide to take the Sharpie route, I'd suggest a small test spot before going all out. Another option would be to fasten a patch of an old leafy suit or blind on there--wouldn't add hardly any weight or heat.
Mind if I ask why?I can't find any other source for these Cruzr buckles other than Alibaba. Where are these made? What is the source? I'm replacing mine with an AustriAlpin buckle.
I can't find any other source for these Cruzr buckles other than Alibaba. Where are these made? What is the source? I'm replacing mine with an AustriAlpin buckle.
I can't find any other source for these Cruzr buckles other than Alibaba. Where are these made? What is the source? I'm replacing mine with an AustriAlpin buckle.
Did you contact the Cruzr guy and ask him?
Sent from my iPhone using Tapatalk
Mind if I ask why?
Did you contact the Cruzr guy and ask him?
Sent from my iPhone using Tapatalk
You know if your leg buckles broke you should not fall. If you waist belt failed you would not fall unless you slipped out of your saddle. If your bridge failed or tether failed you may die. Or your if ropeman fails which is certainly possible you may die it cuts your tether. If you side load a carabiner it may fail.Because I'm having a hard time trusting a buckle that says 24kn but can't find the source or testing or documentation. Nothing. Look at the same style buckles being used on this site https://www.alyxstudio.com/collections/accessories
You know if your leg buckles broke you should not fall. If you waist belt failed you would not fall unless you slipped out of your saddle. If your bridge failed or tether failed you may die. Or your ropeman which is certainly possible.
The H2 comes without leg straps. The leg straps are an add on for the recon. Many of the tethrd crew have been know to cut their leg straps off.
If it says it is rated at 24 Kn it likely is and if it isn't .... OH Well. The belt does not take most of your weight the bridge and bridge loops are critical.