• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Can you build a 1.3 pound stick

GBlevins92 said:
b2f4e99371051770e28c1368331e41dd.jpg


Tapped out holes in my lone wolf sticks I've been modifying 7/16" holes on one inch centers total package came out to 1.8 pounds I am completely satisfied with this for myself now I just got to make 3 more and wrap them in stealth strips.


Sent from my iPhone using Tapatalk
Click to expand...

And then sell them to me


Sent from my iPhone using Tapatalk
 
GBlevins92 said:
b2f4e99371051770e28c1368331e41dd.jpg


Tapped out holes in my lone wolf sticks I've been modifying 7/16" holes on one inch centers total package came out to 1.8 pounds I am completely satisfied with this for myself now I just got to make 3 more and wrap them in stealth strips.


Sent from my iPhone using Tapatalk
Click to expand...
Looks good!
 
How much weight did you eliminate?


Sent from my iPhone using Tapatalk
 
PJC said:
How much weight did you eliminate?


Sent from my iPhone using Tapatalk
Click to expand...

To be honest I'm not sure I didn't get an accurate weight before I put the holes in but since I haven't done the others I will weigh one before it has holes.


Sent from my iPhone using Tapatalk
 
ImThere said:
Hows the testing going guys? We haven't heard form y'all in a while? any updates?
Click to expand...

The step design in that picture worked great but the total weight came in at 1.4lbs. So we had to machined a good bit more off the step to get to 1.3 w/o holes. We put 250lbs on one step and It ended up bending slightly. We just had to remove to much step material to hit the 1.3lbs, good news is the rivets and diy verse button worked great.


Sent from my iPhone using Tapatalk
 
20ftup said:
The step design in that picture worked great but the total weight came in at 1.4lbs. So we had to machined a good bit more off the step to get to 1.3 w/o holes. We put 250lbs on one step and It ended up bending slightly. We just had to remove to much step material to hit the 1.3lbs, good news is the rivets and diy verse button worked great.


Sent from my iPhone using Tapatalk
Click to expand...
I am trying your design with 1/8 angle and welding it to the post to keep it from moving. I am getting a friend to weld it today.
 
20ftup said:
The step design in that picture worked great but the total weight came in at 1.4lbs. So we had to machined a good bit more off the step to get to 1.3 w/o holes. We put 250lbs on one step and It ended up bending slightly. We just had to remove to much step material to hit the 1.3lbs, good news is the rivets and diy verse button worked great.


Sent from my iPhone using Tapatalk
Click to expand...
Just wondering is that with a 1/16 post and does that include the rope.
 
20ftup said:
The step design in that picture worked great but the total weight came in at 1.4lbs. So we had to machined a good bit more off the step to get to 1.3 w/o holes. We put 250lbs on one step and It ended up bending slightly. We just had to remove to much step material to hit the 1.3lbs, good news is the rivets and diy verse button worked great.


Sent from my iPhone using Tapatalk
Click to expand...
I should mention that it was 250lbs hanging off of one side of one step


Sent from my iPhone using Tapatalk
 
Ontariofarmer said:
I am trying your design with 1/8 angle and welding it to the post to keep it from moving. I am getting a friend to weld it today.
Click to expand...

This tread has been quiet with all of the tethrd/kestrel mesh talk so I thought I would revive it .
Ontario did you get a chance to try out the welded 1/8 angle? I’m curious how this turned out as I need to figure out what method of build I want to try.


Sent from my iPhone using Tapatalk
 
Chistavocat said:
This tread has been quiet with all of the tethrd/kestrel mesh talk so I thought I would revive it .
Ontario did you get a chance to try out the welded 1/8 angle? I’m curious how this turned out as I need to figure out what method of build I want to try.


Sent from my iPhone using Tapatalk
Click to expand...
My friend who welds aluminium says he will have them ready next week. I have waited 8 weeks. I am making 12 inch sticks to try and will let you know when they are finished how I like them. I have some long sticks made from the @ImThere steps. They are great. But he has the same problem I have... getting someone to make them.
I really want to know how putting cam cleats on the side of the sticks work. That will make them stack perfect. I also want to know how the cam cleats are working on WE steps. I may try both when I get time. Time is short all spring but maybe I will have time soon.
 
Its a cam on a stepp...and it works
I have not put it thru a lot of testing.
Its my first step in my practice runs.
 
You must log in or register to reply here.
Back
Top