Thanks. I didnt realize they had the lower profile ones. I have the climbing stick version that puts me further off the tree and aive been concerned the torque might snap on some day. Ordered.
-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Milled platform post
- Thread starter Huntingbob
- Start date
Here is something I just did that doesn’t require any modifications and actually makes it easier to set.
Basically you thread the strap through the post and add a carabiner to the strap. ( I’ll call this a versa strap) You throw the versa strap around the tree while the platform is folded vertical up against the post. That way you can press the stand against the tree with your chest while you throw the strap/ carabiner around the tree. Then you attach the carabiner to the other end of the strap and pull the cinch buckle tight. ( very similar to a versa button except on a carabiner. After that the stand isn’t going anywhere and you can attach the 2nd strap that goes from one side of the platform to the other. This strap is the main strap that really cams down the whole system. The versa strap acts to help in holding the stand up while you cam it down with the 2nd (main) strap.it is also a
Sent from my iPhone using Tapatalk
I was thinking versa button to be used with rope/amsteel blue and attached in the same fashion as my helium climbing sticks or does this only work on the sticks because they only receive downward pressure? Would the versa button/amsteel method not work for a platform purpose? This way would keep every “tying in” system the same and keep me from having to learn how to build a whoopie sling for cam style.
PS. Dang good looking posts
Sent from my iPhone using Tapatalk
PS. Dang good looking posts
Sent from my iPhone using Tapatalk
@Huntingbob What is the round button on the post under the seat? And could you tell me the length and weight of the post? It looks really nice!
Last edited:
That is a steel rest pad that the seat adjusting bolt rests against so it doesn’t deform the aluminum. That’s an old post design. My new ones are flush with the aluminum
Sent from my iPhone using Tapatalk
Are there any post available at this time? Kinda desperate to get my hands on one
If your interested in a post please send me a message and we can arrange everything.
Please note I have increased the price to $100.00
because on an increase in raw material.
Sent from my iPhone using Tapatalk
Please note I have increased the price to $100.00
because on an increase in raw material.
Sent from my iPhone using Tapatalk