EStew22
New Member
- Joined
- Aug 30, 2018
- Messages
- 22
I have been playing around with designs quite a bit and I think I’m going to settle on this one. I wanted a Knaider Swaider combo that didn’t require any weight bearing stitching but at the same time didn’t sacrifice strength. I used all spliced 7/64 Amsteel for this project. I also didn’t like the idea of a plastic buckle on the knaider in my head if I ever slipped and put a load on the calf strap I wanted It to hold up so I used an aluminum COBRA buckle. Even with the beefy parts this full set came in at 12 oz. I am pretty happy with it but I thought I’d toss it to you guys and get your thoughts and feedback. The nylon webbing over the Amsteel works a lot like the zip ties or calf bands you’ve seen, you just pull it up to expose a bigger loop to put your foot through, then smooth it out to keep everything clean and tight to your foot.
Good luck this season guys,
Evan
Sent from my iPhone using Tapatalk