• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Treebolts revisited

Bruce G said:
Elastic cartridge holder? Did I miss something ?
Click to expand...

Nutterbuster said:
You're welcome.
cc9ea95d5e532a2a061e6d14356e0cf2.jpg
0e9282ae1ab6787b9f6973845a4902d7.jpg
0100d5e1aae67602cc07a0d37d282ab8.jpg
341bd76ac0cacb6c667c0c5b934a9481.jpg


Sent from my Moto Z (2) using Tapatalk
Click to expand...
was wondering about the slipperyness of the carbon rods. With wet muddy rubber boots and no end cap, might this be an issue?
 
Sipsey said:
Curious about the slipperyn

was wondering about the slipperyness of the carbon rods. With wet muddy rubber boots and no end cap, might this be an issue?
Click to expand...

I was curious about that too. Maybe have to plasti dip them?


Sent from my iPhone using Tapatalk
 
I may dip them. I have played with them in the backyard, but haven't hunted yet. So far, there isn't really a difference. My feet are big enough that the bolt head didn't really help with traction anyways.

I'll definitely report back Saturday if all goes well. Should be making an early morning climb with wet, muddy boots.

Here's to hoping I don't gut myself!
 
Nutterbuster said:
Details, man! Details! lol
Click to expand...
Post 580 this thread about 20 back, just used a thicker walled tube, grinded down the opening, drilled holes for handle and bit, scavanged drill bit, bolts and handle from broken EZ Kut drill, dipped the opening 3 coats, and spray painted the end that was too long to fit in the plasti-dip container so I don't lose it. It is also 1 inch longer than the original for easier drilling.

Sent from my SM-G930V using Tapatalk
 
rabidd099 said:
Post 580 this thread about 20 back, just used a thicker walled tube, grinded down the opening, drilled holes for handle and bit, scavanged drill bit, bolts and handle from broken EZ Kut drill, dipped the opening 3 coats, and spray painted the end that was too long to fit in the plasti-dip container so I don't lose it. It is also 1 inch longer than the original for easier drilling.

Sent from my SM-G930V using Tapatalk
Click to expand...
Gotcha. I remember now...
 
No worries your just too excited about your fancy carbon bolts ... And I'm jealous! Next paycheck...or the next one, gotta space my purchases out.

Sent from my SM-G930V using Tapatalk
 
Got my 6 inch bolts today. Going to use plasti dip tonight. Are you guys dipping them 3.5 inches ?
 
I just got back from a three day huntfest. Ez kut is no match for a oak tree. Plain miserable to try and hand drill a oak tree. The wind was blowing hard enough that I could use my dewalt all bundled up in a old sweatshirt. Seemed to work good if the wind is above 15 mph. I use to be afraid of heights when hunting out of treestands. with saddle and bolts im hitting 20 ft on a regular bases. I feel safe using the bolts. They seem indestructible.
 
I got my carbon steps finish this morning. And I have to say these things are the way to go for the guys who are able to use bolts in the pass. It’s a game changer with this type of climbing.

15633B1F-155E-4140-8CB6-3D3773468506.jpeg
 

Attachments

  • C2858886-1139-478F-AA11-485E23B6AB83.jpeg
    C2858886-1139-478F-AA11-485E23B6AB83.jpeg
    35.7 KB · Views: 22
  • Like
Reactions: WHW
Just about to dip my bolts. Damn. I want those carbon rods now. You guys are killing me. Do they make noise when you move them around in your hand ? Any flex when you stand on them? Maybe someone can post a video of these.
 
I never noted any flex. Noise is like two lead pencils hitting together.
 
Bruce G said:
Just about to dip my bolts. Damn. I want those carbon rods now. You guys are killing me. Do they make noise when you move them around in your hand ? Any flex when you stand on them? Maybe someone can post a video of these.
Click to expand...
No flex, these are stiff as hell. good description on noise. They definelty are quiter and less obtrusive sounding than the grade 8 bolts.
 
Nutterbuster said:
Maybe it's just my mind playing tricks, but I'm getting a little flex if I bounce on them.
Click to expand...
What kind of an angle are you putting them in at? I have been wearing pretty soft soled shoes when I"ve practiced with them, so maybe I"m not feeling it. I"lll try with some vibram hiking boots this weekend.
 
You must log in or register to reply here.
Back
Top