Hawkeye Bowhunter
Well-Known Member
I just finished making an adjustable/openable bridge for my T/Line Covert Lite saddle. I was not happy with the factory bridge so I made a new one from some left over ropes I had laying around. Haven’t tried it in the tree yet but I’m looking forward to improved functionality. Bridge length finished up around 38”.
I used:
8’ of Predator rope for the bridge
30” of 8mm Prusik cord for the eye to eye cord
Factory Black Diamond carabiner
I tied a follow-through figure 8 to attach to left bridge loop.
I tied a Schwabish Prusik knot on the right side bridge end and attached the BD carabiner before connecting to the right bridge loop. The stopper knot on the right side is a barrel knot.
Pix attached.
Disclaimer: I am not an expert and this is for informational purposes only! Use at your own risk!
I used:
8’ of Predator rope for the bridge
30” of 8mm Prusik cord for the eye to eye cord
Factory Black Diamond carabiner
I tied a follow-through figure 8 to attach to left bridge loop.
I tied a Schwabish Prusik knot on the right side bridge end and attached the BD carabiner before connecting to the right bridge loop. The stopper knot on the right side is a barrel knot.
Pix attached.
Disclaimer: I am not an expert and this is for informational purposes only! Use at your own risk!