- Joined
- Oct 17, 2021
- Messages
- 738
Last year I papertuned and got nice clean bullet holes. I then did some walk back tuning out to 50, got everything hitting nice and pretty. Then I broadhead tuned. At that point everything was so close I think one adjustment did it, I was touching field points and broadheads (montecs) out to 40.
I have a 97 Hoyt tenacity that was my grandfathers and I’m still hunting with it because it shoots like a dream plus it has a very high sentimental value.
I had a great season last year getting a nice doe with my bow and my first buck during gun season. A week ago I busted out the paper tune rack to start all over again. I’ve Nocktuned all of my arrows. Every single one is giving me between a 1-1.25 inch right tear.
At this point, the bow is timed, center shot is set at 13/16, ATA is dead nuts, brave height is a hair long but still within spec, and the Nock point is right around 1/8 high (that’s what she likes). I have added up to six full twists to both right side yokes, which I backed off to 3 because the lean was getting a bit sketchy. I’ve bumped my rest back and forth 3/16 in either direction and I’m still getting the same tear on every shot.
Do I cut my losses and go right into walk back tuning again then broadhead tuning or is there some magic voodoo I’m missing here?
I have a 97 Hoyt tenacity that was my grandfathers and I’m still hunting with it because it shoots like a dream plus it has a very high sentimental value.
I had a great season last year getting a nice doe with my bow and my first buck during gun season. A week ago I busted out the paper tune rack to start all over again. I’ve Nocktuned all of my arrows. Every single one is giving me between a 1-1.25 inch right tear.
At this point, the bow is timed, center shot is set at 13/16, ATA is dead nuts, brave height is a hair long but still within spec, and the Nock point is right around 1/8 high (that’s what she likes). I have added up to six full twists to both right side yokes, which I backed off to 3 because the lean was getting a bit sketchy. I’ve bumped my rest back and forth 3/16 in either direction and I’m still getting the same tear on every shot.
Do I cut my losses and go right into walk back tuning again then broadhead tuning or is there some magic voodoo I’m missing here?