-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Best option to silence/reduce noise on carabiners??
- Thread starter billywobbles
- Start date
I want to be able to inspect my carabeaners at any time. Tailgunners solution looks awesome - how do you make those? Wanna do some trading?
They slide on and off with a little effort .all my stuff is in storage ...but if i can find some i will pm you for your adress and ship it...no trades just love.i just cut them slightly long and fold the ends in
If by chance i dont have any you can order 1 inch tubular webbing from strapworks dot com.in à couple different camos.if you e mail the custom department you can order my custom tree bark camo.its called JM treebark .tell them jeremy moore sent you...i love thier stuff.i will check my storage unit.
I "silence" all of my hunting use carabiners, but that extends to specifically the barrel of the screw-lock (or auto-lock) AND the spine. I prefer shrink tubing for this purpose, always adhesive lined, and I now use a rubbery clear shrink tube from Wesspur designed for rope end caps or protection. This is personal decision, and I can't advocate this, but it's what I personally do.
Attachments
I would only cover if metal to metal contact like a carabiner going through a ascender or descender or mechanical progress capture. All others are left stock. But for covered, no need to waste money on stealth strips for this, any athletic or felt tape will work.
Adhesive-lined 3:1 Shrink Tubing - 3/4"
Details3/4" shrink tubing for prusiks and cords up to 11mm (7/16"). 3:1 adhesive heat-shrink tubing is top-quality protection for your finished splices. Shrinks as far down as 1/3 of original size when heated. Sold by the foot. Three sizes available:3/4" - for prusiks and cords up to 11mm...
www.wesspur.com
I just bought a big pack of heat shrink tubing……GENIUS! I agree the vet tape doesn’t hold up. I did start putting super glue on the ends to lock them down.
I leave them alone so I can inspect for any cracks,But mine are used on friction hitches not metal on metal so noise is not a factor but the nylon tubing is a great idea because it can be removed to inspect your gear.
If your carabiner is conected your bridge than you can smack it with your release or the cam on your bow when moving it over the top to your weak side.i dont like any bare metal showing on my hunting gear...cant make metal noise if there aint none.i would put tubular webbing on the frame and shrink tube on the locking mechanism to be safe.
I cover the outside edge of mine but not any hinges or other moving parts. I like the inside slick so the ropes/webbing can slide easily. Bare metal acts like a magnet and will attract other bare metal to clankity clank clank with at every opportunity. Like above said I try to cover it all, unless there’s a safety / function reason not to.
Anyone ever use rope jacket in lieu of tubular webbing, like @tailgunner ? I don't have any of the larger arb ropes, or larger utility rope, but it looks like it should work, and might be a use for retired ropes.
Another application of amsteel courtesy of saddle hunter . Com.
This is a great idea.
