Where do you get your shrink tubing?Been using it for a few years. Works great! I have black though
Where do you get your shrink tubing?
Ok, thank you, I didn' know if maybe it was some kind of industrial grade tubingJust got it at Home Depot. I had to hit a few of them around me to get enough for all my bolts when I did it lol.
One thing I like about applying a liquid is that you can make the coating end exactly at the depth of the drilled to act as a way to verify your bolt is fully seated. Is it possible to get the edge of the shrink tube to fall right where you want it? The only experience I have with shrink material is thinner stuff, and it shrinks at unpredictable rates.
Sent from my iPhone using Tapatalk
You make it longer than cut it exactly where u want it to stop, I used 2 different sizes when I did mine I did the bolt one size and then went over the bolt head with a bigger sizeOne thing I like about applying a liquid is that you can make the coating end exactly at the depth of the drilled to act as a way to verify your bolt is fully seated. Is it possible to get the edge of the shrink tube to fall right where you want it? The only experience I have with shrink material is thinner stuff, and it shrinks at unpredictable rates.
Sent from my iPhone using Tapatalk
You did the entire bolt?You make it longer than cut it exactly where u want it to stop, I used 2 different sizes when I did mine I did the bolt one size and then went over the bolt head with a bigger size
Sent from my XT1650 using Tapatalk
I'm a moron. I gave misinformation. This is what I used. SorryIs this the stuff y’all are using?
https://www.amazon.com/dp/B073YQ25LK/ref=cm_sw_r_cp_api_0cUPAb09PRANS
Sent from my iPhone using Tapatalk
No just about 1" past where I wanted it to stopYou did the entire bolt?
I must've missed that one. The one I got was the same manufacturer I believe just 2:1 shrink ratio.
Would this work for silencing S clips you use for gear hanger?