• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Recent content by smokeeter

  1. S

    Hand Warmer Pouch

    My favorite one is a sleeve off of an old sheepshin coat, I ran a cord thru the sleeve and tied it into a loop that I place around my neck , when I take my hands out of the muff it stays put.
  2. S

    Platforms and COLD FEET

    a piece of carpet underpad chip foam ( the denser one) is great for extra warmth and helps make shifting your feet less noisy
  3. S

    DIY Saddle Platform

    the manufacture states fiberglass reinforced plastic , I know it is quite dense and hard. tough on saw blades so I'm not worried about the strength. the grids are almost 1/4 in thick . I does make for a heavy platform this is the only down side. It is quiet and slip resistant, not much creaking...
  4. S

    DIY Saddle Platform

    If I was to use the fiber-grate for the base I would drill thru the center of the first section of grating with a long bit probably from both sides all the way thru until you had holes the entire width, then I would feed the brace (3/8 "rod) thru the entire cross section, this would pivot nicely...
  5. S

    DIY Saddle Platform

    The best deal out there, this was an off cut from a project at our club. google fibergrate and Grainger carries it.
  6. S

    Old Treestand ID Help

    looks like a Baker climbing stand.
  7. S

    Shot a Buck at < 10 yards with a Slug - and I hit shoulder... and he ran off is still alive. (Question)

    that's too bad about your buck, I'd like to share an experience I had several yrs ago. I arrowed a fairly large mature buck late in the season, we hung the deer for a few days prior to butchering and when we commenced to cutting the deer up it was noted that the ribs on both sides of the deer...
  8. S

    How do you carry antlers for rattling?

    The best way I found is to drill and install a couple of eye bolts into the base of the antlers and then thread a bungie cord thru the eye bolt. The bungie can be stretched around your waist or pack for transport and then hung from your stand .
  9. S

    DIY Saddle Platform

    Hello, I'm fairly new to this forum and I thought I'd share a little DIY project I just completed. I decided to put together a platform for my saddle hunting, I have an older Anderson tree sling that I modified by adding an Amsteel Bridge but I needed a platform so this is what I came up with...
See more
Back
Top