TJutte
Member
- Joined
- Mar 8, 2020
- Messages
- 74
Update for the CBE Engage Hybrid - the calculations used to find my sight tape were inaccurate. Set my slider as my 40 yard pin, and was about four inches low at 45. Off the target at 60. Now I’m just finding the proper tape through trial and error.
.010 pins are tough, seems like they’re borderline too dark in with moderate cloud cover, and waaaay too bright with the rheostat on. .019 just felt more consistent to me, brightness was always great. But they’re too big for long shots, .010 is much better beyond 60.
The build quality and design is a 5/10. A lot of the screws are in the dumbest possible location, so you can’t easily get an Allen key in there. Gotta remove the sight from the bow to make simple housing adjustments.
The windage knob has click adjustments but not elevation. Elevation is just a smooth twist, no clicks, and doesn’t move the pins efficiently. Pretty freakin stupid.
I do not recommend this sight.
Sent from my iPhone using Tapatalk
.010 pins are tough, seems like they’re borderline too dark in with moderate cloud cover, and waaaay too bright with the rheostat on. .019 just felt more consistent to me, brightness was always great. But they’re too big for long shots, .010 is much better beyond 60.
The build quality and design is a 5/10. A lot of the screws are in the dumbest possible location, so you can’t easily get an Allen key in there. Gotta remove the sight from the bow to make simple housing adjustments.
The windage knob has click adjustments but not elevation. Elevation is just a smooth twist, no clicks, and doesn’t move the pins efficiently. Pretty freakin stupid.
I do not recommend this sight.
Sent from my iPhone using Tapatalk