• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Anyone sharpen broadhead blades ?

Anobody

Anobody

Well-Known Member
SH Member
Joined
Dec 3, 2015
Messages
3,505
Looking for an offseason assist to ressharpen my rage blades if anyone wishes to help let me know. I will compensate for time and trouble.
 
I'm also not necessarily in favor of resharpening replaceable blades but, back when I was shooting Rages I could put an edge on them using a RADA Quick Edge sharpener when I was out at camp and maybe didn't have any replacements with me.

I just went down in the basement and dug out the sharpener and a couple very dull old Rage blades. I didn't spend any real effort on them but a few passes through the wheels and they shaved the hair off the back of my hand. Probably not as sharp as brand new but they would do in a pinch. The sharpener is available online for less than $20.

EDIT: FWIW, this sharpener works great on fillet knives too.

1704404323529.png1704404364397.png
 
Have your broadheads been through animals?
Not exactly what you’re looking for in an answer, but I personally wouldn’t re-sharpen a mechanical head and use the same ferrule to shoot another animal. Even with fixed blades I’m cautious shooting two animals with the same head. With mechs, it’s possible, even probable, that the ferrules and mechanisms are compromised after going through an animal, hitting the dirt, glancing bone, etc. and would still pass visual inspection but next time that head gets shot, there’s a good chance for premature deployment in flight, structural integrity of the head being for-crap and a total breakdown of sharp metal inside a deer that you are going to feed your family or hand the butcher, who you want to keep all his fingers. I know my butcher hates finding expandable blades in deer, and I just shot a doe with a Grim Reaper and the first thing I checked was if there were any bits left in her.
 
All heads new just rode in quiver or in broadhead case
 
I use one of those rada wheel sharpeners on my rage blades. Also I use them a lot with simmons broadheads and most of my work knives.
 
Anobody said:
No foam I mainly worry about the tips but would feel better honing all the blades.
Click to expand...
If it has a blade to be used for killing a critter, it needs to be sharpened, period. New or used or just rode in the quiver for a while. If you take the time to sharpen or just touch up a head, you know it is hunt ready. Why leave to chance the one part that makes the drippins?
 
I agree and I’m not overly impressed with these rage blades which is why I’ve solicited some help to make them better
 
I’ll do them but probably for the same price or cheaper you can do them yourself. The Stay Sharp jig, Smith’s Broadhead Sharpener and the sharpener mentioned above will do it. 3 or 4 passes with the smith’s is good. A few minutes with Stay Sharp is better.
 
You must log in or register to reply here.
Back
Top