-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Beast conversion
- Thread starter Big mike
- Start date
View attachment 66083
This is how my Beast Mini is set up. Harken 150 cam cleat from EWO ( comes with bolts and nylocks). Single step aider for me. I was looking for appropriate grommets for where the aider goes thru the stick when Boynebowhunter walked up with a couple of fresh turned bushings. I really like the aider opening at 90 degrees to the tree. This is wonderful with a single step aider, less so with a multi-srep
This is how my Beast Mini is set up. Harken 150 cam cleat from EWO ( comes with bolts and nylocks). Single step aider for me. I was looking for appropriate grommets for where the aider goes thru the stick when Boynebowhunter walked up with a couple of fresh turned bushings. I really like the aider opening at 90 degrees to the tree. This is wonderful with a single step aider, less so with a multi-srep
One of the bolts for the cam cleat will use existing mounting hole, you'll have to drill the second hole.
I just did. Had a spare beast stick and an extra 18” feather stick drilled from a cam cleat already. I had bought a EWO Ultimate One Stick in 18” and then bought a 12” feather stick when I realized I wanted it more compact.
I took a hacksaw and cut it to 12”, drilled holes for the steps/standoffs. I added a cam cleat, Amsteel rope, 1/4” cable clamp to keep the rope from moving, and sewn 3 step 15” aider from EWO. Also bought a pack-n-play pouch for the aider.
I took a hacksaw and cut it to 12”, drilled holes for the steps/standoffs. I added a cam cleat, Amsteel rope, 1/4” cable clamp to keep the rope from moving, and sewn 3 step 15” aider from EWO. Also bought a pack-n-play pouch for the aider.