• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Cam cleat hardware

T

tgoodson1814

Member
Joined
Oct 5, 2020
Messages
61
I am installing a cam cleat to my Shikar stick and I have figured out I need a #12-24 1.5 flat head cap screw but I can’t find one anywhere I have been to local places and the internet ...bolt depot has them but not long enough anyone who knows where I can get ahold of some please share ...I need the flat head not the round so it will fit flush in the hold of the cleat


Sent from my iPhone using Tapatalk
 
Ive used #8 grade 8 hardware on my shikars with the schaefer fast entry and harken micro. Check Fastenal. Fast shipping too! Only place i could find grade 8 that small
 
Definitely search around the forum. These were mentioned for a one-inch stick:

Fastenal Industrial Supplies, OEM Fasteners, Safety Products & More

Fastenal is the largest fastener distributor in North America. Shop our huge selection of OEM, MRO, construction, industrial, and safety products.
www.fastenal.com www.fastenal.com

These were mentioned for Mini Shikars:

Fastenal Industrial Supplies, OEM Fasteners, Safety Products & More

Fastenal is the largest fastener distributor in North America. Shop our huge selection of OEM, MRO, construction, industrial, and safety products.
www.fastenal.com www.fastenal.com
 
That's the stuff.

Also they have 316 stainless in washers, fender washers, lock nuts. I used the socket cap bolt, with a #8 washer on top, a fender washer and lock nut on bottom. I also put the button post on the back and run it over the stick b4 going around the tree. This does 2 things: let's me avoid a girth hitch in the amsteel and I can wrap the rope over the post to get more torque when tightening the rope.
c3bb72d8f788b3503e7c2ea8cd44bbfe.jpg


Sent from my SAMSUNG-SM-G930A using Tapatalk
 
Ace hardware had them for me. They got everything and some here


Sent from my iPhone using Tapatalk
 
JFin15 said:
That's the stuff.

Also they have 316 stainless in washers, fender washers, lock nuts. I used the socket cap bolt, with a #8 washer on top, a fender washer and lock nut on bottom. I also put the button post on the back and run it over the stick b4 going around the tree. This does 2 things: let's me avoid a girth hitch in the amsteel and I can wrap the rope over the post to get more torque when tightening the rope.
c3bb72d8f788b3503e7c2ea8cd44bbfe.jpg


Sent from my SAMSUNG-SM-G930A using Tapatalk
Click to expand...

Why did you make the choice to put the scout on the bottom? just curious
 
You must log in or register to reply here.
Back
Top