• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Continuous Loop Question

S

STLMOBOW

New Member
Joined
Jul 28, 2020
Messages
5
Just finished a continuous loop out of 3/16 Amsteel as part of an adjustable bridge, and as I was stretching the rope out to even it and work the loose ends in, I ended up pulling the splice apart a little so that there's maybe 1.5 - 2 in. at the splice where you can see two ropes. I'm completely green when it comes to Amsteel splices and their properties. Does the splice need to be tight, or is my loop ok?IMG_20200805_212459__01__01.jpg
 
This doesn't look right did you do a brummel and bury both sides? Watch a youtube video to get it right. Something is off. If you're using it for life support or load bearing something might go wrong
 
I think that can happen in a brummel splice when you bury the wrong end. In this case you need to bury the opposite way you did. I can't be certain of it, but look back at what you did.
 
I think you need to bury the line closer to the lock Brummel. it looks like you buried the line couple of inches from the brummel
 
You must log in or register to reply here.
Back
Top