Cruzr XC Waist Belt Quick Adjust Question

[Country]

I couldn't find much on this topic, so I'm wondering if any of you have altered your Cruzr XC waist belt buckle so it can be quickly adjusted while you're wearing it. One of my only complaints about the XC is when I put it on, I can't easily snug it up for walking and then easily loosen it while on stand with the stock setup. The additional sliders are obviously there for a reason, but I really don't like them.

 

[Fl Canopy Stalker]

I couldn't find much on this topic, so I'm wondering if any of you have altered your Cruzr XC waist belt buckle so it can be quickly adjusted while you're wearing it. One of my only complaints about the XC is when I put it on, I can't easily snug it up for walking and then easily loosen it while on stand with the stock setup. The additional sliders are obviously there for a reason, but I really don't like them.

I didn’t have that problem. It definitely adjusted easily for me. Keeping it tight while walking was a different story....

 

[Jeremy_D]

I just talked to Cruzr about this. They told me to undo the tri glide on the male side of the buckle will allow you to put the saddle on loose then snug it up after you buckle it. FWIW I undid the tri glide but havent tried it out yet for myself

 

[Fl Canopy Stalker]

I just talked to Cruzr about this. They told me to undo the tri glide on the male side of the buckle will allow you to put the saddle on loose then snug it up after you buckle it. FWIW I undid the tri glide but havent tried it out yet for myself

Just remember to put it back in the tri glide since it isn’t sewn in.....

 

[Jpdarby2]

I had the opposite issue of it coming too loose while walking around so I doubled the tag end back over, but the does severally hinder the adjustability

 

[Jeremy_D]

I had the opposite issue of it coming too loose while walking around so I doubled the tag end back over, but the does severally hinder the adjustability

Im not sure but I think the older ones are hard to adjust then a change was made and the latter ones come loose.

 

[Jpdarby2]

Im not sure but I think the older ones are hard to adjust then a change was made and the latter ones come loose.

That must be true since my XC was manufactured in fall 2020

 

[raisins]

I bought mine with the original, non-Cobra waist buckle. I removed the factory one and installed a Cobra buckle that has the adjustment on both sides (slider). I also put heavy duty triglides on both tag ends. I don't have any issue quickly feeding a bit of belt webbing through either way as needed and it never moves (doesn't loosen up). The triglides do slow me down a bit, but it's only a few seconds.

 

[Country]

Makes me want to just keep it the way it is I guess. Thanks for the input.