TreeHopper2023
New Member
- Joined
- Oct 27, 2017
- Messages
- 12
nice tig welding can't wait to see how you attached it, to a tree.
Great Job.
Great Job.
What is the overall height compared to the overall distance of the platform out from the tree? That would be my only concern at this point, making sure the weight distribution and geometry work.
The aluminum square tubing reminds me of my old API climbing stands. I wonder if there is a safe and practical way to incorporate a coated chain or cable with pin through tubing as a method of attachment. It would be quieter than a ratchet and be self contained. The chain/cable may limit tree diameter possibilities some but just an idea.
It’s 5” from tree tooth to tree tooth the 15” from the tooth to the end of platform
Sent from my iPhone using Tapatalk
This is my only concern. The 5” to 15” ratio. A good ratchet strap might get it done though. You’ve done an outstanding job on the build. I hope it works!!
Sent from my iPhone using Tapatalk
@NCFarmweld what's the good word on your testing?
I would think this would be preferred so that you are only stressing the weld (sheering) on 1 plane vs 2.Your welds are on point!! Nicely done! I'm thinking a ratchet strap through the top tube and around the tree.