dbennett
Member
Hey Guys... I'm new to saddle hunting. I've been researching and looking at different DIY saddles on this forum and videos for several months and finally decided to give it a try. This is the completed version of my DIY project. I used a Fusion RCH attached by quick clips to the sit drag with a battle belt attached to the sit drag by thread injection, sum dump pouches and an amsteal blue bridge. I made the lineman rope and tether out of some 12mm petzl rope i had. Both are fitted with prusik knots and prusik tenders (not shown). i did have most of the items on hand, with the exception of the sit drag and amsteal blue and 1 dump pouch and the accessory hanging strap. so all said and done i have about $75 into it and it weighed 5.8# as pictured with tether, lineman rope and accessory hanging strap in the pouches.